HÖRMANN HSE2-868 BS BLACK REMOTE

Shipping:

HÖRMANN

Choose your colour:

Your remote control HSE2-868 BS BLACK has been added to your cart

useful equipment for your remote control



Free postage order 2 remotes

How to program HÖRMANN HSE2-868 BS BLACK remote control ?

Video - Programming a remote control HÖRMANN HSE2-868 BS BLACK :

92% of our customers find it easy to program this remote

« Simple programming without additional material ! »

Why choose the HÖRMANN HSE2-868 BS BLACK remote control ?

HÖRMANN HSE2 868 BS BLACK remote control available in two colours that are black and white. This remote control is replaced by the new compatible model Hormann HSE2 868. The HORMANN with the reference HSE2 868 BS BLACK is a 2 button remote for gates, using the frequency 868.3 MHz. 

Product description and properties

HÖRMANN HSE2-868 BS BLACK remote control allows you high-security and comfort. Indeed, this equipment will permit to easily open and close your engines by making your daily life easier. This transmitter is highly coveted thanks to its sober design and black casing that give it great elegance. The shape of its buttons and the way they are placed optimize its originality. 

Its rectangular shape, which is not out of the ordinary, make it a very original and easy to use and to operate thanks to its two buttons. Moreover, it is very easy to program, the operation does not require any specific equipment.

 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your Hormann HSE 2 868-BS gate remote control.

 

Important information

ATTENTION: to program your remote control you should :

Keep pressing down the remote’s button, the LED illuminates blue, goes off for 5 seconds then flashes red or blue: you can do the programming of your transmitter when the LED flashes red/blue.

 

This remote protects against unauthorised use by radio coding for even more security!

 

WARNING: This model is not compatible with the HORMANN 868 Mhz remote with blue buttons.

 

NOTE: The Hormann HSE2-868 BS Black benefits of the new technology BiSecur.

This technology allows the double communication between the remote control and your motorized gate.

This remote is fully compatible with other BiSecur transmitters.

Compatible with all Hörmann drives which operate under the frequency 868MHz.

 

WARNING: This transmitter is not compatible with remote controls that have grey (40MHz), yellow (433MHz) or green buttons (27MHz & 26MHz) only compatible with black buttons (BiSecur) models.

 

Note: Make sure that you are buying the correct remote control. This is the Hormann HSE2 model with the frequency of 868.3 MHz and black buttons. The colour of the buttons is linked to the frequency and models with different frequencies/buttons are not compatible.

 

What do you need to know about this remote control?

The remote control’s operation

The Hormann HSE2 868-BS black, BiSecur handheld rolling code transmitter suitable for door drives from Hörmann with the frequency 868.3MHz (suitable if you have already used hand-held transmitters with black buttons). And is also suitable for current Garador and Hormann gate openers, such as Ecomatic, Promatic, Supramatic and GaraMatic systems.

 

A high-quality original HÖRMANN remote, with a bi-directional FM radio signals, feature that uses the same 128-bit encryption employed by banks for online banking security. With easy auto-programming procedure in the receiver that requires no special equipment! Easy to transfer encoding from hand-held transmitter to hand-held transmitter


 

Hormann HSE2 868 BS remote control replaces the following Hormann gate remotes:

 

It is compatible with the following Hormann gate remotes: 

  • HS1/HS4/HS5 868 BS

  • HSE2 868 BS

  • HSS4 868 BS

  • HSP4 868 BS

  • HSD2-C/HSD2-A 868 BS

  • HSZ1/HSZ2 868 BS


 

The black colour of the buttons show that this hand-held transmitter is compatible with 868.3 MHz frequency. Hörmann remotes buttons have a specific colour for every radiofrequency.

 

The 2 button Rolling-code hand transmitter can be programmed to support up to 2 doors, lights or electric gates.

 

Note: These new handsets are backwards compatible so can be used with all Hörmann automatic operators produced since 2005. This means that a new transmitter can control both a new gate operator and an existing garage door operator. If you have an old type Hörmann remote control working under the frequency 868,3 MHz, you can replace it by BiSecur transmitter but an old type remote control won't work with new type motors with BiSecur system.

 

Note that Hörmann hand transmitters are only compatible with Hörmann garage door operators.

Exists in different versions: 1, 2, 4 or 5 buttons and in different classic colours: black, orange, green, red, purple, grey and yellow. Or in special colours: wood or carbon imitation.


 

HÖRMANN HSE2 868 BS BLACK MHz 2-button remote control with an exclusive design, it is powered by a long lithium battery life 3V battery type CR2032. A distance up to 150 meters! Operates on temperatures from -20°C to +60°C and has an IP20 protection class.

Easy transmission of the coding with a self-learning system. A 2 channel remote control with rolling code type of encoding. The programming only takes a few minutes. 

 

Good to know

Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate. 

It is important to know that there are three types of programming (coding systems): Switches, auto-programming, and programming in the receiver. 

To choose the correct remote control, it is highly recommended to consider the following criteria: the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products. 

 

Ergonomics

Hormann HSE2 868-BS black remote control is only 72 mm long, a width of 28 mm and a thickness of 14 mm. Its small and reduced size makes it very simple to handle and easy to use. The handheld transmitter is a shock-resistant device thanks to its casing which makes it very tough and strong under all kind of pressure or shocks. You can attach it along to your rings by the provided keychain.

 

How to program HORMANN HSE 2_868 BS Black remote control?

 

Important steps of the programming

 

Remark: The programming will incite the opening of your garage door. To avoid an accident, we recommend that you program your remote control while you are inside of your garage.

Programming of your new remote control:

There are several methods for programming your new remote control

 

From an already-programmed remote control (old models):

 

CAUTION: During the coding operation, if you press first the buttons on the new remote control, you run the risk of erasing your already programmed remote control.

 

1. Place your new remote control and a previously programmed remote control so that they can touch. Press a button on your previously programmed remote control.

3. While holding down the button on your previously programmed remote control, press

on the same button on your new remote control. Hold it down. The led of

your new remote control flashes slowly. Wait 5 seconds. The led flashes faster.

4. Release the buttons.

5. Repeat this procedure for each button you wish to program. Wait 10 seconds.

7. Your new remote control is programmed.

 

From an already-programmed remote control (new models):

 

1. Place your new remote control and an already programmed remote at 3-4 cm one

on the other. Press a button on your previously programmed remote control.

3. Your already programmed remote control will start flashing blue and red.

4. While holding down the button on your previously programmed remote control, press

on the same button on your new remote control. Hold it down. The led of

your new remote control flashes slowly. Wait 5 seconds. The led of your flashes faster.

5. Release the buttons.

6. Repeat this procedure for each button you wish to program. Wait 10 seconds.

8. Your new remote control is programmed.

 

Programming from an old remote control to a new one:

 

1. Open the case of your new remote control so that you can access the battery.

2. In order to be able to program your new remote control from an old one

model, you have to remove the battery. While remaining pressed on the button you want

to program, replace the battery and keep the button pressed.

3. The LED flashes blue slowly and then quickly, red slowly and then quickly. You can release the button.

4. Your new remote control is ready to be programmed from an old one by

following the same steps as in the section "From an already-programmed remote control (old models)".

 

Can’t seem to program your HÖRMANN HSE2-868 BS BLACK gate remote control?

 No worries, our team is available to assist using our expertise. First, consider looking through the programming instructions delivered with each remote control. our online store also provides tutorials for most HÖRMANN remote controls. If you need any more assistance, call our free helpline. One of our experts will take you through each step in order to help you program your gate hand transmitter remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.


 

About the brand HÖRMANN

Hormann is a german brand, is one of the leading manufacturers of high-quality garage doors, industrial doors, electric gates and garage door operators.

 

Hormann manufactures the highest quality range of sectional, roller and up and over garage doors from various manufacturing facilities in Germany, using the very latest processes to produce garage doors. One of the best products in the market of garage doors, that offer strength, security and style, with an almost endless amount of options for specifications, finishes and colours.

Hörmann products are developed and manufactured in highly specialised factories. The results are patents and one-of-a-kind products.



 

Why shop your HÖRMANN HSE2-868 BS BLACK remote control on our online store?

 

- Advantage 1:

Hoping to take delivery of quickly? Choose 24-hour delivery anywhere in United Kingdom soil.

 

- Advantage 2:

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

 

- Advantage 3:

Hoping to save time and be able to use your HÖRMANN HSE2-868 BS BLACK gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. As a result, you can quickly start using your item.

Our website will lead you through each stage of the process of buying your HÖRMANN HSE2-868 BS BLACK remote control.

Technical information HÖRMANN

Brand HÖRMANN
Model HSE2-868 BS BLACK
Reference : 039XM039
Frequency 868.3 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!
Number of buttons 2
Type of programming Auto-programming
Type of battery CR2032
Dimensions 11 x 7 x 3 mm
Battery and instructions included Yes
Read the reviews of our customers , withTrustpilot All of the following reviews are from customers who bought the product.
nigel
March, 20/10/2019

« excellent overall experience. »


Graham
INVERURIE, 03/10/2019

« Very good service »


Mrs
Aberdeen, 23/02/2019

« Product as required but very difficult to programme »


Neil
Dundee, 03/12/2018

« . »


Ian
Lanark, 03/10/2018

« Very happy with the service provided. »


Richard
Norwich, 31/07/2018

« Order said it was not processed so reordered then ended up with two units and had to return one »


Anthony
Taunton, 21/10/2017

« Honest and straightforward service. Happy to recommend mend them »


john
blackpool, 12/04/2017

« delivery was very extended and slow. »


Stephen Peter
Fort William, 08/04/2017

« For your information the remotes came with instruction manuals that were in six Eastern European languages. None of them English, as it was a british address you were sending them to more than a bit remiss. So contacted your customer help department who e-mailed me the programming instructions, unfortunately these did not work even though I followed them to the letter. After several repeated unsuccessful attempts I contacted Hormann the manufacturers of my garage door system directly, who were able to instruct me in what I needed to do to programme them over the telephone, which worked successfully first attempt. Please do not contact me again and take me off of any mailing lists, do not publish my identity or details, please could you remove these from your systems, Thank you. »


John
Nottingham, 16/02/2017

« All the instructions are in foreign languages and not an English section had to find out how to program the remote off the internet »


The most popular brands