order 2 remotes
Reference : : TVMIO868P02
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||7.1 x 4.1 x 2 cm|
|Battery and instructions included||Yes|
|remote control||TELECO MIO-868-P04|
TELECO MIO-868-P02 remote control available only in one colour which is black with black buttons. This remote control is a replacement for the old version I-LIKE. The TELECO with the reference MIO 868 P02 is a 2-button remote control gate opener, using the frequency 868 MHz.
To improve your daily comfort when using your motorized garage door, TELECO MIO-868-P02 remote control is the best option. By investing on this type of transmitter, you are choosing a convenient and reliable gadget.
A remote control which programming is done with the receiver, the garage door opener has two buttons and is easily used by its convenient shape.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your MIO-868-P02 gate remote control.
ATTENTION: Exists a “programmable” version for co-op use with a coded label stuck on the back of the remote control.
In such case, only the syndic or the installer of the receiver can register another remote control.
NOTE: This transmitter is compatible with all TELECO-868 and TV-LINK models using the frequency 868 Mhz.
Note: This gate opener is a replacement to the old I-LIKE reference.
The remote control’s operation
TELECO MIO-868 a 2-channel remote control using the frequency 868 Mhz with a fixing clip for central home automation. This handheld transmitter is compatible with all TELECO radio receivers working with frequency 868.3 Mhz: TELECO RCD-868-A04N, TELECO RCD-868-M04, TELECO TVRCM868A02.
The programming is done with the receiver, a very simple and easy procedure.
Teleco MIO-868-P02 remote control replaces the following Teleco gate remotes:
It is compatible with the following Teleco gate remotes:
Teleco MIO-868-P02 gate key fob is equipped with two buttons that control all the movements of your garage door according to your specifications. The frequency of this item is 868 MHz.
As for its programming, the device has an auto-programming system with 0 switch, you have to do the programming in the receiver.
Mio 868 P04 a 2 channel remote control with an innovated design, it is powered by a 3V lithium battery type CR2032. A range up to 100 meters outside and 35 meters inside !
The registration of the MIO P02 only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
Teleco mio868-P02 remote control is only 60 mm long, a width of 30 mm and a thickness of 10 mm. Its reduced size and light-weight make it very simple to handle and easy to use. The handheld transmitter is aesthetical with a compact design, can be used as a keyring or keyfob. It is also a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. The item is very elegant and convenient thanks to its 2 buttons and special shape.
Please note: If you keep the programming button of your receiver pressed down too long, you will erase the programming code of all your already programmed remote controls.
Programming of your new remote control:
Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).
When the LED light on the receiver illuminates or blinks, press a button on your new remote control for 1 second.
Let the button go. The LED on the receiver turns off immediately or in the following 10 seconds according to the model.
Your new remote control is successfully programmed.
Finding it hard to program your TELECO MIO-868-P02 gate remote control ?
No need to worry, we are available to help using our know-how. Firstly, consider reading the information sent with each MIO-868-P02 remote control. Remote Control Express also provides instructional videos for most TELECO remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
If you live in a co-op, some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.
TELECO was founded in the 70s and first specialised in the production of receivers for televisions but as time passed they shifted more into the production remote controls for garages.
We provide you TELECO remote controls that are 100 % original and you also receive a guarantee of 2 years.
It is mandatory to choose the right TELECO remote which is compatible with your receiver of your garage
The brand TELECO offers you a large choice of remote controls in your catalogue. To find the right TELECO remote control under this vaste choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.
Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.
Why buy your TELECO MIO-868-P02 remote control on Remote Control Express?
-Advantage 1 :
Wanting to receive your gate remote control quickly? Choose 24-hour delivery anywhere on United Kingdom soil.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your TELECO MIO-868-P02 gate remote control right now? You’ll be glad to learn that all our remote controls come with batteries. This means you can quickly start using your TELECO MIO-868-P02 remote control.
Our online store will lead you through each stage of the process of buying your TELECO MIO-868-P02 remote control.