Reference : : TVTXP868A01
The advantages of Remote Control-Express:
|Number of buttons||1|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||6 x 3 x 1 cm|
|Battery and instructions included||Yes|
TELECO TVTXP-868-A01 is a gate remote control available only in one colour which is white. This remote control is replaced by the fully compatible new model TELECO TXP-868-A04 with 4 buttons. The TELECO with the reference TXP-868-A01 is a 1-button remote control gate opener, operates under the frequency 868.3 MHz.
Have you chosen to invest in a gate operator from the prestigious TELECO brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A remote control which programming is done in the receiver, the TELECO TXP-868-A01 transmitter has one button and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your TVTXP-868-A01 gate remote control.
NOTE: This remote is compatible with all the products TELECO-868, TV-LINK and DOMATEAM using the frequency 868 Mhz.
WARNING: If your gate opener is black then the correct model is the Teleco TXP-433-A01, which is not compatible. Transmitters with different frequencies are not compatible.
Please note: If is written Elero, Tousek or Crawford on the casing of your remote control, this remote will not be compatible. We do not have any replacements for Elero remotes.
ATTENTION: Exists in TAK version with black casing, for use in collective systems or in co-ops only. Not compatible.
The remote control’s operation
TELECO TVTXP-868 a 1-channel handheld transmitter using the frequency 868.3 Mhz with a fixing clip for central home automation TVlink. The programming is quick and simple because it’s done with the receiver.
Teleco TVTXP-866-A01 remote control replaces the following Teleco gate remotes:
TELECO I-LIKE TX2
It is compatible with the following Teleco gate remotes:
TVTXP-866-A01 a 1-channel keyfob that controls your gate and garage door...etc according to your specifications. The frequency of this item is 868.3 Mhz.
As for its programming, the device has an auto-programming system with 0 switch, you have to do the programming in the receiver.
TELECO TVTXP-868-A01 a 1-channel rolling code key fob with a small size, it is powered by a 3V lithium battery type CR2032. A distance up to 100 meters with Teleco receivers. This remote control is compatible with TELECO radio receiver using the frequency 868.3 Mhz: TELECO RCD-868-M04.
The registration of the Teleco TVTXP A01 only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate.
It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver.
To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products.
TELECO TVTXP 868 A01 remote control is only 59 mm long, a width of 33 mm and a thickness of 13 mm. If you are looking for a practical remote control with a good design and functionality choose right away the TVTXP-868-A01. This transmitter is highly aesthetical, its special shape and reduced size makes it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Its oval shape and 1 black button make it very elegant ! The item is provided with a fixing clip for more convenience !
Programming of your new remote control:
There are several ways to program your new remote control
Approach your motor so you are standing a few feet away, press the button P3 behind your already-programmed remote with a sharp object. The receiver emits a beep.
Press the button you wish to program on your new remote control. Let it go, the beep stops and then starts again for 5 seconds.
Press the same button on your new remote again until the receiver beeps occasionally. Then wait 10 seconds.
Your new remote control is programmed.
Open the casing of your receiver located next to your motor. Press the button P1 on your receiver board. Keep it pressed down until the receiver emits a beep.
While keeping the button P1 pressed down, press the button you wish to program on your new remote control. Keep it pressed down until the receiver emits beeps occasionally.
Let the button go and wait 10 seconds.
Your new remote control is programmed.
Can’t seem to program your TELECO TVTXP-868-A01 gate remote control?
Fear not, we are here to assist using our skills. Firstly, consider reading the programming instructions and the teleco automation notice sent with each remote control. our website also provides tutorials for most TELECO remote controls. If you need any more details and assistance, you can call our free helpline. One of our experts will take you through each step to support you in programming your item. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
Some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.
TELECO was founded in the 70s and first specialised in the production of receivers for televisions but as time passed they shifted more into the production remote controls for garages.
We provide you TELECO remote controls that are 100 % original and you also receive a guarantee of 2 years.
It is mandatory to choose the right TELECO remote which is compatible with your receiver of your garage
The brand TELECO offers you a large choice of remote controls in your catalogue. To find the right TELECO remote control under this vaste choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.
Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.
Why buy your TELECO AUTOMATION TVTXP-868-A01 remote control on our purchase platform?
- Advantage 1:
Wanting to take fast delivery? Choose 24-hour delivery anywhere on United Kingdom soil.
- Advantage 2:
Purchase multiple remote controls and save money by taking advantage of our shipping tenders.
- Advantage 3:
Hoping to save time and be able to use your TELECO gate remote control straight away? You’ll be glad to learn that we sell all our products with batteries. This means you can quickly start using your item.
Our online store will lead you through each stage of the process of buying your TELECO TVTXP-868-A01 remote control.