Your remote control TVTXP-868-A04 has been added to your cart
useful equipment for your remote control
« Simple programming without additional material ! »
TELECO TVTXP-868-A04 remote control available only in one colour which is white with black buttons. This remote control is fully compatible with the new TELECO TVTXE-868-A04 which has 4 buttons. The TELECO with the reference TVTXP868A04 is a 4-button remote control gate opener, using the frequency 868.3 MHz.
Have you chosen to invest in a gate operator from the prestigious TELECO brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A remote control which programming is done with the receiver, the Teleco TVTXP868 A04 transmitter has four buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your TELECO TVTXP 868 A04 gate remote control.
NOTE: This gate opener is compatible with all the products TELECO-868, TV-LINK and DOMATEAM using the frequency 868 Mhz.
WARNING: If your remote control is black then the correct model is the Teleco TXP-433-A04, which is not compatible. Transmitters with different frequencies are not compatible.
ATTENTION: Exists in TAK version with black casing, for use in collective systems or in co-ops only. Not compatible.
The remote control’s operation
TELECO TVTXP-868 a 4-channel remote control using the frequency 868.3 Mhz with a fixing clip for central home automation TVlink. This handheld transmitter is compatible with all TELECO radio receivers working with frequency 868.3 Mhz: TELECO RCD-868-A04N, TELECO RCD-868-M04, TELECO TVRCM868A02.
The programming is quick and simple because it’s done with the receiver.
Teleco TVTXP-868-A04 remote control replaces the following Teleco gate remotes:
It is compatible with the following Teleco gate remotes:
TELECO TXP-868-A02 (PROG)
TVTXP-868-A04 a 4-channel keyfob that controls all the movements of your gate and garage door...etc. according to your specifications. The frequency of this item is 868.3 Mhz.
As for its programming, the device has an auto-programming system with 0 switch, you have to do the programming in the receiver.
TVTXP A04 remote control with 4 black buttons for garage door operators. This model is powered by a battery type CR2032. A hand transmitter with a high range up to 100m with TELECO receivers ! The TELECO RCD-868-M04 receiver is ideal for this gate remote control.
The registration of the Teleco TVTXP A04 only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate.
It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver.
To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products.
Teleco tvtxp868-A04 remote control is only 59 mm long, a width of 33 mm and a thickness of 13 mm. If you are looking for a practical remote control with a good design and functionality choose right away the TVTXP-868-A04. This transmitter is highly aesthetical, its special shape and reduced size makes it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Its oval shape and 4 black buttons make it very elegant !
There are several methods for programming your new remote control:
Remote-to-remote programming :
Approach to your motor and press the hidden button P3 behind your already-programmed remote with a sharply pointed object. The receiver emits a beep.
Press the button you wish to program on your new remote control. Let it go, the beep stops and then starts again for 5 seconds.
Press the same button again on your new remote until the receiver beeps, wait 10 seconds.
Your new remote control is programmed.
Open the casing of your receiver located next to your motor.
Press the programming button P1 on the receiver board. Keep it pressed down until the receiver emits a beep.
While keeping the button P1 pressed down, press the button you wish to program on your new remote control. Keep it pressed until the receiver emits beeps.
Let the button go and wait 10 seconds.
Your new remote control is programmed.
Finding it hard to program your TELECO TVTXP-868-A04 gate remote control ?
No worries, our team is here to help using our know-how. Firstly, consider looking through the notice delivered with each TVTXP-868-A04 remote control. our website also provides tutorial videos for most TELECO remote controls. If you need any more help, call our free helpline. One of our experts will take you through each step to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
If you live in a co-op, some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.
TELECO was founded in the 70s and first specialised in the production of recievers for televisions but as time passed they shifted more into the production remote controls for garages.
We provide you TELECO remote controls that are 100 % original and you also recieve a guarantee of 2 years.
It is mandatory to choose the right TELECO remote which is compatible with your reciever of your garage
The brand TELECO offers you a large choice of remote controls in your catalogue. To find the right TELECO remote control under this vaste choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.
Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.
Why buy your TELECO TVTXP-868-A04 remote control on our website?
-Advantage 1 :
Wanting to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your TELECO TVTXP-868-A04 gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. This means you can quickly start using your TELECO TVTXP-868-A04 remote control.
Remote Control Express will lead you through each stage of the process of buying your TELECO TVTXP-868-A04 remote control.
|Frequency||868.3 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||4|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||20 x 40 x 70 mm|
|Battery and instructions included||Yes|