« Simple programming without additional material ! »
TELECO TXP-433-A01 is a gate opener available only in one black colour. This remote control is replaced by and fully compatible with the new model TELECO TXP-433-A04 with 4 buttons. The TELECO with the reference TXP-433-A01 is a remote for portals and garage doors, it has a single button and operates under the frequency 433.92 MHz.
Do you wish to use an accessory that ould meet your comfort and safety needs? We advise you to use the TELECO TXP-433-A01 remote control. The performance of this device allows you to control automation like your gate, your garage door, your roller shutter, etc.
The TXP-433-A01 is a gate opener known for its original design. Thanks to its thinness and oval shape, this device allows you an exceptional grip. If you are searching for a remote that is easy to use and to handle, this gadget is made for you.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your TXP-433-A02 gate remote control.
NOTE: This gate opener is compatible with all the products TELECO-433 using the frequency 433 Mhz.
WARNING: If your remote control is white then the correct model is the Teleco TXP-868-A01, which is not compatible. Transmitters with different frequencies are not compatible.
If the ring around the buttons on your remote control is exactly of the same colour as the rest of the casing (dark grey), then the model displayed here is not compatible. The correct one would be the TELECO TAK 868 which is used for co-ops and can only be programmed by a professional.
Please contact your property management company to get this remote control.
Please note: If is written Elero, Tousek or Crawford on the casing of your remote control, this remote will not be compatible. We do not have any replacements for Elero remotes.
The remote control’s operation
TELECO TXP-433 a single-channel remote control using the frequency 433.92Mhz with a fixing clip for central home automation TELECO. This beeper is compatible with all TELECO radio receivers working with frequency 433 Mhz.
This handheld transmitter uses a Rolling code system with self-learning function and easy programming procedure from the receiver.
Teleco TXP-433-A02 remote control replaces the following Teleco gate remotes:
It is compatible with the following Teleco gate remotes:
TXP-433-A01 a keyfob with only one button that controls all the movements of your gate and garage door...etc according to your specifications. The frequency of this item is 433.92 Mhz.
As for its programming, the device has an auto-programming system, you can also do the programming in the receiver.
TELECO TXP-433-A01 a rolling code key fob with a small size, it is powered by a battery type CR2032. A distance up to 100 meters. It has a rolling code type encoding that guarantee absolute security because it’s impossible to clone or copy the transmitter.
The registration of the Teleco TXP A01 only takes a few minutes and the programming requires no special equipment.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
By having this type of remote control, you will have the chance to make your daily life easier while increasing your safety.
If you think that your model is malfunctioning, we suggest that you replace it without further delay. In order to enjoy the benefits of your device, you must consider the brand, the number of buttons, the colour of the case and the buttons and the type of coding on your remote control.
This solution allows you to avoid the risk of incompatibility.
TELECO TXP 433 A01 remote control is only 54 mm long, a width of 34 mm and a thickness of 13 mm. Its reduced size and light-weight make it very simple to handle. This transmitter is very elegant with compact design, it can be used as a keyring or keyfob. It is also very tough and strong under all kind of pressure or shocks what make it a shock-resistant device. The remote control is provided with a fixing clip for more convenience!
Programming of your new remote control:
There are several ways to program your new remote control
Approach your motor so you are standing a few feet away, press the button P3 behind your already-programmed remote with a sharp object. The receiver emits a beep.
Press the button you wish to program on your new remote control. Let it go, the beep stops and then starts again for 5 seconds.
Press the same button on your new remote again until the receiver beeps occasionally. Then wait 10 seconds.
Your new remote control is programmed.
Open the casing of your receiver located next to your motor. Press the button P1 on your receiver board. Keep it pressed down until the receiver emits a beep.
While keeping the button P1 pressed down, press the button you wish to program on your new remote control. Keep it pressed down until the receiver emits beeps occasionally.
Let the button go and wait 10 seconds.
Your new remote control is programmed.
Can’t seem to program your TELECO TXP-433-A01 gate remote control?
No need to panic, our team is available to assist by using our skills. First of all, consider reading the information delivered with each TXP-433-A01 remote control. our online store also provides tutorials for most TELECO remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
Some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.
TELECO was founded in the 70s and first specialised in the production of receivers for televisions but as time passed they shifted more into the production remote controls for garages.
We provide you TELECO remote controls that are 100 % original and you also receive a guarantee of 2 years.
It is mandatory to choose the right TELECO remote which is compatible with the receiver of your garage
The brand TELECO offers you a large choice of remote controls in your catalogue. To find the right TELECO remote control under this vaste choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.
Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.
Why order your TELECO TXP-433-A01 remote control on our online store?
- Advantage 1 :
Wishing to take delivery of as soon as possible? Choose 24-hour delivery anywhere in the United Kingdom.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Hoping to save time and be able to use your TELECO TXP-433-A01 gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. As a result, you can quickly start using your TELECO TXP-433-A01 remote control.
- Advantage 4 :
Remote Control Express will lead you through each stage of the process of buying your TELECO TXP-433-A01 remote control.
|Frequency||433.92 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||1|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||7 x 5 x 3 mm|
|Battery and instructions included||Yes|