Your remote TELECO MIO-868-P04

TELECO MIO-868-P04 remote control available only in one colour which is black with black buttons. This remote control is a replacement for the old version I-LIKE. The TELECO with the reference MIO 868 P04 is a 4-button remote control gate opener, using the frequency 868 MHz. 

Product description and properties

Have you chosen to invest in a gate operator from the prestigious TELECO brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A Rolling code remote control which programming is done with the receiver, the Teleco MIO868 P04 transmitter has four buttons and is easily used by its ergonomics. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your TELECO TVMIO 868 P04 gate remote control.

Important information

ATTENTION: Exists a “programmable” version for co-op use with a coded label stuck on the back of the remote control.

In such case, only the syndic or the installer of the receiver can register another remote control. 

NOTE: This gate opener is compatible with all the products TELECO-868 and TV-LINK using the frequency 868 Mhz.

Note: This model may replace the old I-LIKE reference. 

What do you need to know about this remote control ?

The remote control’s operation

TELECO MIO-868 a 4-channel remote control using the frequency 868 Mhz with a fixing clip for central home automation. This handheld transmitter is compatible with all TELECO radio receivers working with frequency 868.3 Mhz: TELECO RCD-868-A04N, TELECO RCD-868-M04, TELECO TVRCM868A02. 

The programming is quick and simple because it’s done with the receiver.

Teleco MIO-868-P04 remote control replaces the following Teleco gate remotes:

• TELECO TVTXP-868-A01

• TELECO TVTXP-868-A02

• TELECO I-LIKE TX2

It is compatible with the following Teleco gate remotes: 

• TELECO TVTXP-868-A02

• TELECO TXP-868-A02 (PROG)

• TELECO TVTXP-868-A01

• TELECO TVTXP-868-A04

MIO-868-P04 a 4-channel rolling code keyfob that controls all the movements of your gate and garage door...etc. according to your specifications. The frequency of this item is 868 Mhz.  

As for its programming, the device has an auto-programming system with 0 switch, you have to do the programming in the receiver. 

MIO P04 remote control with 4 black buttons for garage door operators.This model has a rolling code type of encoding and is powered by a 3V Lituim battery type CR2032. A hand transmitter with a high range up to 100m with TELECO receivers ! 

The registration of the Teleco MIO P04 only takes few minutes and the programming requires no special equipments. 

 If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

Good to know

Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate. 

It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver. 

To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products. 

Ergonomics

Teleco mio868-P04 remote control is only 60 mm long, a width of 30 mm and a thickness of 10 mm. If you are looking for a practical remote control with a good design and functionality choose right away the MIO-868-P04. This transmitter is highly aesthetical, its special shape and reduced size make it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Very elegant keyfob thanks to its oval shape and 4 black buttons ! 

How to program TELECO MIO-868-P04 remote control ?

Important steps of the programming

Please note: If you keep the programming button of your receiver pressed down too long, you will erase the programming code of all your already programmed remote controls.

Programming of your new remote control: 

1. Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).

2. When the LED light on the receiver illuminates, press a button on your new remote control for 1 second.

3. Let the button go. The LED on the receiver turns off immediately or in the following 10 seconds.

4. Your new remote control is programmed.

Can’t seem to program your TELECO MIO-868-P04 gate remote control ? 

No need to worry, we are available to help using our skills. First of all, consider reading the information sent with each MIO-868-P04 remote control. our website also provides tutorials for most TELECO remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos. 
 

Frequently Asked Questions about this product

How to program my TELECO remote control if i live in a shared space or condo? 

If you live in a co-op, some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.

About the brand TELECO

TELECO was founded in the 70s and first specialised in the production of receivers for televisions but as time passed they shifted more into the production remote controls for garages.

We provide you TELECO remote controls that are 100 % original and you also receive a guarantee of 2 years.

It is mandatory to choose the right TELECO remote which is compatible with your receiver of your garage

The brand TELECO offers you a large choice of remote controls in your catalogue.  To find the right TELECO remote control under this vaste choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.

Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.

Why order your TELECO MIO-868-P04 remote control on our website? 

-Advantage 1 : 

Wishing to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere on United Kingdom soil.

-Advantage 2 : 

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

-Advantage 3 : 

Wanting to save time and be able to use your TELECO MIO-868-P04 gate remote control immediately? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your TELECO MIO-868-P04 remote control.
 

Remote Control Express will lead you through each stage of the process of buying your TELECO MIO-868-P04 remote control.