Your remote control HSM4 40 MHZ has been added to your cart
useful equipment for your remote control
« Simple programming without additional material ! »
HÖRMANN HSM4 40 MHz remote control available only in black with grey buttons. This remote control can be ordered as a replacement to the old model Hormann HSM2 40. The HORMANN with the reference HSM4 40 is a 4 button remote for gates, using the frequency 40.685 MHz.
If you have chosen to invest in a gate operator from the prestigious HÖRMANN brand because your remote control is no longer functioning, it is time to replace it with a new compatible model. The original HORMANN HSM4 40MHz remote control will allow you to control your motorized gate remotely in a very simple way !
This transmitter is programmed from the receiver. It has 4 buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your HSM4 gate remote control.
NOTE : The name HSM2/4 written on the back is not the reference.
Please note: The colour of the buttons is very important for this brand because it is linked to the frequency. Remote controls with different frequencies are not compatible.
Please be sure to choose a model that has buttons of the same colour as your current remote. The model displayed here has grey buttons.
WARNING: This model is not compatible with the HORMANN 868 Mhz remote with blue buttons.
The remote control’s operation
A high quality original HÖRMANN remote using a frequency of 40.685 MHz, to emit signals to the receiver and is powered with a battery 12V.
The new Hormann HSM4 40MHz, hand held transmitters for opening automatic doors and gates has an easy auto-programming procedure, with an already-programmed remote or with the receiver, that requires no special equipment !
Hormann HSM4 40MHz remote control replaces the following Hormann gate remotes:
HÖRMANN HSM2 40 MHZ
It is compatible with the following Hormann gate remotes:
The 4 button hand transmitter can be programmed to support up to four doors, lights or electric gates.
HÖRMANN HSM4 40 MHz 4-button auto-programming remote control with an exclusive design, it is powered by a long battery life 12V battery. A distance up to 100 meters !
A 4 channel remote control and allows 4 automatic gates and garage doors.
The registration of the HSM4 40 only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate.
It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver.
To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products.
Hormann HSM4 40MHz remote control is only 60 mm long, a width of 38 mm and a thickness of 16 mm. This transmitter is highly aesthetical, its special shape and reduced size makes it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Its rectangular shape and 4 grey buttons make it very elegant !
Remark: The programming will incite the opening of your garage door. To avoid an accident, we recommend that you program your remote control while you are inside of your garage.
Programming of your new remote control:
There are several methods for programming your new remote control
1- Remote-to-remote programming :
Attention : During the coding process, if you press one of the buttons of the new remote first, yiou risk erasing the codes of all your already programmed remotes.
Place an already-programmed remote control next to the new one so they touch, press a button on your old remote control.
Keep the button of your already-programmed remote pressed, press the same button on your new remote till the LED light on your new remote control blinks slowly. Wait 5 seconds till the LED light blinks faster.
Let the button go and repeat the procedure for each button you wish to program.
Wait 10 seconds, your new remote control is now programmed !
2- Receiver-based programming :
Attention : Only use this method if you currently do not have any functional remote. This method erases all the already-programmed remotes.
Aach your receiver located next to your motor. On the receiver, press the programming button P. When the led on the receiver blinks slowly, let the button go.
Press the button you wish to program on your new remote control. Keep it pressed down. When the LED on the receiver blinks faster and then turns off, let the button go.
Wait 10 seconds.
Your new remote control is programmed.
3- Programming of your new Hormann HSM4 remote control from Horman DH remote that has already been programmed :
Open the casing of your already-programmed remote. On the receiver board, you will see a row of 10 small programmable switches, numbered 1 to 10 that are in the ON or OFF position. The position of these small switches determines the system programming code.
Please make a note of the positions.
Open the casing of your new remote control. Press the red button next to the battery, the LED light on the new remote illuminates.
Enter your programming code as follows :
The top button of the remote corresponds to the ON position of the internal programmable switches.
The bottom button of the remote corresponds to the OFF position of the internal programmable switches.
When you set the position of the last switch, the LED on your new remote blinks.
Your new remote control is programmed.
Can’t seem to program your HÖRMANN HSM4 40 MHZ gate remote control ?
No need to worry, we are here to help using our expertise. First of all, consider reading the programming instructions delivered with each HSM4 40 MHZ remote control. Remote Control Express also provides tutorial videos for most HÖRMANN remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
Hormann is a german brand, is one of the leading manufacturers of high quality garage doors, industrial doors, electric gates and garage door operators.
Hormann manufacture the highest quality range of sectional, roller and up and over garage doors from various manufacturing facilities in Germany, using the very latest processes to produce garage doors.One of the best products in the market of garage doors, that offer strength, security and style, with an almost endless amount of options for specifications, finishes and colours.
Hörmann products are developed and manufactured in highly specialised factories. The results are patents and one-of-a-kind products.
Why order your HÖRMANN HSM4 40 MHZ remote control on Remote Control Express?
-Advantage 1 :
Wanting to receive your gate remote control quickly? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your HÖRMANN HSM4 40 MHZ gate remote control immediately? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your HÖRMANN HSM4 40 MHZ remote control.
Remote Control Express will lead you through each stage of the process of buying your HÖRMANN HSM4 40 MHZ remote control.
|Model||HSM4 40 MHZ|
|Frequency||40.685 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||4|
|Type of programming||Auto-programming|
|Type of battery||12V(23A)|
|Dimensions||74 x 40 x 24 mm|
|Battery and instructions included||Yes|