Your remote control HS5-868-BS BLACK has been added to your cart
useful equipment for your remote control
« Simple programming without additional material ! »
HÖRMANN HS5-868-BS BLACK remote control available in several colours. This remote control can be ordered as a replacement for the old model Hormann HSM4 868. The HORMANN with the reference HS5-868-BS BLACK is a 5 button remote for gates, using the frequency 868.3 MHz.
If you have chosen to invest in a gate operator from the prestigious HÖRMANN brand because your remote control is no longer functioning, it is time to replace it with a new compatible model. The original HORMANN HS5-868-BS BLACK remote control will allow you to control your motorized gate remotely in a very simple way !
This transmitter is programmed from the receiver. It has 5 buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your HORMANN HS5-868-BS BLACK gate remote control.
WARNING: This model is not compatible with the HORMANN 868 Mhz remote with blue buttons.
The Hormann HSE5-868 BS Black benefits of the new technology BiSecur.
This technology allows the double communication between the remote control and your motorized gate.
You can buy this transmitter as a replacement to the old model Hormann HSM4 868.
This remote is fully compatible with other BiSecur transmitters.
Compatible with all Hörmann drives which operate under the frequency 868MHz.
The remote control’s operation
A high quality original HÖRMANN BiSecur remote with easy programming procedure with the receiver that requires no special equipment !
The new Hormann HS5 868 BS BiSecur, hand held transmitters for opening automatic doors and gates, feature bi-directional FM radio signals that use the same 128 bit encryption employed by banks for online banking security. This system not only makes the transmitters more secure but also means that the signal is more reliable and gives extended operating distances.
Hormann HSE5-868 BS Black remote control replaces the following (old type) Hormann gate remotes:
It is compatible with the following Hormann BiSecur gate remotes:
The 5 button hand transmitter can be programmed to support up to four doors, lights or electric gates.
Note: These new handsets are backwards compatible so can be used with all Hörmann automatic operators produced since 2005. This means that a new transmitter can control both a new gate operator and an existing garage door operator. If you have an old type Hörmann remote control working under the frequency 868,3 MHz, you can replace it by BiSecur transmitter but an old type remote control won't work with new type motors with BiSecur system.
HÖRMANN HS5-868-BS BLACK 5-button remote control with an exclusive design, it is powered by a long battery life 1,5 V battery type LR03 / AAA. A distance up to 100 meters, and a range up to 30 meters, local conditions can influence the range of the remote control !
Easy transmission of the coding and a 128 BIT encryption. A 4 channel remote control and allows 5 automatic gates and garage doors. Easy transmission of the coding and the programming only takes few minutes. Operates with the modern radio system for garage and entrance gate operators, so it’s very convenient and safe thanks to bidirectional radio technology.
Good to know
Your motorized gate must be equipped with the BiSecur technology in order to connect with your fob. Another benefit of the new BiSecur system, is that it includes a remote status query. The idea is to ensure that your gate is closed, a simple push of a button will tell you whether your door/gate is open or closed. The multicolour LED light shows red if the door is open and green if is closed. The door can be closed even when out of sight, the LED displays a blue light until the door is closed and then the light turns to green. In this circumstance it is recommended to install an additional photocell for more safety.
The Hormann key fob is available in 1, 2, 4 or 5 buttons and in different colours : classic (black, red, green, purple, orange, grey and yellow) or special (woodgrain or carbon). All theses models are compatible with one another.
Hormann HS5 868 BS BiSecur remote control is only 94 mm long, a width of 38 mm and a thickness of 16 mm. Its small and reduced size makes it very simple to handle and easy to use. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
Remark: The programming will incite the opening of your garage door. To avoid an accident, we recommend that you program your remote control while you are inside of your garage.
Programming of your new remote control:
There are three methods for programming your new remote control
1- Remote-to-remote programming (old model):
Place an old remote control next to the new one so they touch, press a button on your old remote control.
Keep the button of your old remote pressed, press the same button on your new remote till the LED light on your new remote control blinks slowly. Wait 5 seconds till the LED light blinks faster.
Let the button go and repeat the procedure for each button you wish to program.
Wait 10 seconds, your new remote control is now programmed !
2- Remote-to-remote programming (new model):
Place your new remote control side by side with the old one, press the button of your old remote till it starts to flash blue and red.
Release the button on the old remote and press simultaneously the same button on the new one. Hold it till the light flashes slowly. Wait 5 seconds, the light of the remote flashes faster.
Release the buttons and repeat the programming for each button you want to program.
Wait 10 seconds, your new remote control is now programmed !
3- Remote-to-remote programming (from old to new model):
Open the casing of your new remote and take out the battery to prepare the remote for the programming.
Press the button on your new remote you want to program. Hold the button pressed while you put in the battery again.
The LED flashes slowly blue and then faster, flashes slowly red and then faster. Now let go the button.
Your new remote is now prepared for the programming. To program the remote, follow the above steps of “Remote-to-remote programming (old model)”.
Finding it hard to program your HÖRMANN HS5-868-BS gate remote control ?
No need to worry, our team is here to assist using our expertise.
Firstly, consider looking through the notice sent with each HS5-868-BS remote control. Our online store also provides tutorials for most HORMANN remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Press the functional button on your old remote control till the LED flashes
Press the button you want to copy on your new remote, the red LED flashes slowly
Once the code memorized, it flashes rapidly.
Your remote control is now copied !
The reset consists of three basic steps:
Remove the battery for 10 seconds, press and keep holding one of the buttons on the remote control while you put in the battery again.
The LED flashes slowly for 4 seconds and fast for 2 seconds, then solid for a short time.Then release the buttons as the flashes finished.
Do not hold the button through the red flash, this will reset the remote into 40 bit mode. The transmitter is now in 128 bit mode all the code are reset.
Hormann is a german brand, is one of the leading manufacturers of high quality garage doors, industrial doors, electric gates and garage door operators.
Hormann manufacture the highest quality range of sectional, roller and up and over garage doors from various manufacturing facilities in Germany, using the very latest processes to produce garage doors.One of the best products in the market of garage doors, that offer strength, security and style, with an almost endless amount of options for specifications, finishes and colours.
Hörmann products are developed and manufactured in highly specialised factories. The results are patents and one-of-a-kind products.
Why buy your HÖRMANN HS5-868-BS BLACK remote control on our online store?
-Advantage 1 :
Wanting to take delivery of quickly? Choose 24-hour delivery anywhere on United Kingdom soil.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your HÖRMANN HS5-868-BS BLACK gate remote control straight away? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your HÖRMANN HS5-868-BS BLACK remote control.
-Advantage 4 :
Can’t seem to program your HÖRMANN HS5-868-BS BLACK gate remote control ? No need to worry, we are available to assist using our skills. Firstly, consider reading the notice delivered with each HS5-868-BS BLACK remote control. our online store also provides tutorials for most HÖRMANN remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Our online store will lead you through each stage of the process of buying your HÖRMANN HS5-868-BS BLACK remote control.
|Frequency||868.3 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||5|
|Type of programming||Programming with the receiver|
|Type of battery||1.5V(LR03-AAA)-X2|
|Dimensions||3 x 7 x 11 mm|
|Battery and instructions included||Yes|