*CAME no longer produces the reference CAME TOP432NA
order 2 remotes
Reference : : TOP432EE
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Auto-programming|
|Type of battery||CR2016-X2|
|Dimensions||69 x 12 x 32 mm|
|Battery and instructions included||Yes|
|remote control||CAME TOP434EE|
|This remote replaces||CAME TOP432A, CAME TOP432EV, CAME TOP432M, CAME TOP432NA, CAME TOP432SA|
CAME TOP432NA available only in grey. This remote control is replaced by the new fully compatible model CAME TOP432EE. The CAME with the reference TOP 432NA is a remote for gates with 2 grey buttons, using the frequency 433.92 MHz.
If your gate is equipped with a motorization, you will need a remote control to simplify the remote piloting of your drive. If you have a CAME motorization, it is essential to choose a transmitter according to the reference of your system.
CAME TOP432NA 433.92 MHz radio remote control from the popular brand CAME is the high quality control ideal for residential and commercial gate automation systems.
Came Top432na is a two button and a self-learning type remote control, if you need to control more than two automations, you can always purchase the four button version Came Top434na, they are fully compatible with each other.
This transmitter is an auto-programming type. It has 2 buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your CAME TOP432NA gate opener.
WARNING : Do not confuse this remote control with the other CAME version Came TOP862NA using the frequency 868.35 Mhz with black buttons, they are not compatible because the use different frequencies.
Note : CAME 432NA is equipped with grey buttons while the CAME 862NA is equipped with black ones.
Remotes with different frequencies are not compatible.
ATTENTION : The inscription « NA » is the acronym of the new version which is a replacement to the old version « SA »
NOTE : The two versions NA and EV have been replaced by the new version EE.
The remote control’s operation
CAME TOP432NA garage door remote control is compatible with all CAME radio receivers. This transmitter operates with a frequency of 433.92 MHz to emit signals to the receiver.
CAME RE432 is ideal for this gate transmitter.
The programming is done on self-learning. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
CAME TOP 432 NA remote control replaces the following Came gate remotes:
It is compatible with these frequency cards:
And with these radio receivers:
It is compatible with the following Came gate remotes:
Came TOP 432A
Came TOP 432M
Came TOP 432NA
Came TOP 432SA
Came TOP 434M
CAME TOP432NA gate key fob is equipped with two buttons and are the best solution option for residential and commercial automation systems. It has a significant frequency of 433.92 MHz that allows the transmitter to a very long range.
As for its programming, the device has an auto-programming function with a rolling-code and operates on self-learning mode. It is easily programmed from an existing remote or from the receiver.
The gadget is delivered with instruction so don’t panic!
CAME TOP 432NA bi-channel multi-user remote control with an innovated design and 4096 combinations, it is powered by a 2 lithium batteries type CR2016. A distance up to 150 meters that can be increased to 200 meters by setting up an antenna for gates !
Easy transmission of the coding (rolling code type) and easy programming with the receiver. A 2 channel remote control that allows 2 automatic gates and garage doors.
Good to know
As mentioned above, CAME TOP432NA is an auto-programming remote control. It can copy the code of your original already-programmed transmitter. It is necessary for your old remote control to be in an excellent state of operation in order to succeed the programming.
If you no longer have an old remote control or if this one is no longer functioning, you will in this case do the programming of your CAME TOP 432NA directly in the receiver board.
Came TOP 432NA remote control is only 68 mm long, a width of 32 mm and a thickness of 12 mm. If you are looking for a good design remote control and easy to use, choose right away the Came Top432na. This model is slim and highly aesthetical, its colour and two ergonomic buttons give it a classic aspect. It is also lightweight only 18 g and a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. Enabling the device to a long life.
TOP432NA is very simple to handle. Its small and reduced size helps it to quickly find its place in your pocket or in your bag.
NOTE : During the programming process, if you press one the buttons of the already-programmed remote control first, you risk erasing the codes of all your already-programmed remotes.
Programming of your new remote control :
Press both buttons on your new remote control at the same time. Keep them pressed down. When the LED light on your new remote control blinks, let the buttons go.
Press the button of your new remote (T1). Let it go. The LED on your new remote remains lit.
Place an already-programmed remote (T2) next to the new one (T1) so they touch. While the light on your new remote is lit, press the same button on the old remote (T2) that you pressed on the new remote until the LED on the new remote blinks three times.
Your new transmitter is programmed. Repeat the procedure for each button you wish to program.
Remark: This coding operation is available if your already-programmed remote is compatible with the models : TOP 432 SA, TOP 432S, TOP 432 NA, TOP 432 M.
Can’t seem to program your CAME TOP432NA gate remote control ?
No need to panic, our team is here to help using our expertise. First of all, consider looking through the notice delivered with each TOP432NA remote control. our website also provides tutorial videos for most CAME remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step to help you program your gate remote control.
You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Your already-programmed remote control must be in function in order to transmit its code to the new remote control, if not, you have to do the programming in the receiver by following the instructions below :
Open the casing of your receiver located next to your motor. On the receiver board, press the button CH1.
While keeping the button CH1 pressed down, press the first button on your new remote control. Let the buttons go. On the receiver, press the button CH2.
While keeping the button CH2 pressed down, press the second button on your new remote control. Let the buttons go.
Your new remote control is programmed.
With the choice of a CAME remote control, you choose a quality product of one of the market leaders for home automation, garage doors and security technology.
In order to improve the quality of life of the customers CAME offers a wide range of remote controls for gates and garages.
No matter if you are a private person who wants to protect his house or a professional who wants to protect his business. Choose CAME for garage doors and gates.
Among the online references available, we offer you the remote controls Came TOP432EE, the TOP302A, the Came TOP432S, the TOP434EV or the Came TOP862EV. Whatever you need, you can easily find the remote for garages and gates of Came.
We as an expert in the sale of CAME remote controls for garage doors and gates, help you to purchase the right item. Order in a few clicks and get it delivered quickly and safe.
Why order your CAME TOP432NA remote control on our website?
-Advantage 1 :
Wishing to take delivery of fast? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your CAME TOP432NA gate remote control right now? You’ll be glad to learn that all our remote controls come with batteries. As a result you can quickly start using your CAME TOP432NA remote control.
Our website will lead you through each stage of the process of buying your CAME TOP432NA remote control.