order 2 remotes
Reference : : 001TOP-432S
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||10 Switch|
|Type of battery||12V(23A)|
|Dimensions||10 x 5 x 2 cm|
|Battery and instructions included||Yes|
CAME TOP432S available only in black. This remote control is replaced by the new fully compatible model CAME TOP432EE, this new reference is able to copy the code from the CAME TOP432S even if the mode of programming is not the same. The CAME with the reference TOP 432S is a remote for gates with 2 pink buttons, using the frequency 433.92 MHz.
If your gate is equipped with a motorization, you will need a remote control to simplify the remote piloting of your drive. If you have a CAME motorization, it is essential to choose a transmitter according to the reference of your system. CAME TOP 432S remote control is a model of gate transmitter that guarantee a particular performance.
This transmitter is a switch programming type (10 switches) that uses a fixed code. It has 2 buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your CAME TOP432S gate opener.
ATTENTION: Remotes with the same frequency are not compatible if the shape, the colour of keys, colour of the box is different. This applies even if they are from the same brand. They do not have the same electronics.
NOTE: This transmitter is a fixed code type with 10 switches (Dipswitch).
Note: Do not confuse this model with Came Tam T432 remote control.
Remotes with different frequencies are not compatible.
The remote control’s operation
CAME TOP432S garage door remote control is compatible with all CAME radio receivers. This transmitter operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 12V, excellent voltage to optimize the good autonomy of the device.
The programming is done by a coding with 10 Switches. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
CAME TOP 432 S remote control replaces the following Came gate remotes:
It is compatible with the following Came gate remotes:
CAME TOP432S gate key fob is equipped with two buttons that control all the movements of your garage door according to your specifications. It has a significant frequency of 433.92 MHz that allows the transmitter to a very long range.
As for its programming, the device has a Switch programming and a fixed code coding. It is easily programmed from an existing remote or from the receiver.
The gadget is delivered with instruction so don’t panic!
CAME TOP 432S bi-channel multi-user remote control with an innovated design and 1024 combinations, it is powered by a 12V battery type 23A. A distance up to 100 meters !
Easy transmission of the coding (fixed code type) and easy programming by 10 switches. A 2 channel remote control that allows 2 automatic gates and garage doors.
Good to know
To program these transmitters with an existing transmitter simply press the small recess on the transmitter with a flat-head screwdriver and twist the screwdriver to remove the top cover. You will see a row of 10 small dip switches at the base, which will be up or down, set the new dip switches in the same positions as the existing transmitter and replace the covers.
The radio receiver may be located in different places depending on the configuration of your system. Sometimes it’s built-in your automatism board.
Came TOP 432S remote control is only 58 mm long, a width of 31 mm and a thickness of 15 mm. If you are looking for a good design remote control and easy to use, choose right away the Came Top432S. This model is highly aesthetical, its black colour gives it a classic aspect. It is also shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. Enabling the device to a long life.
TOP432S is very simple to handle and easy to use. Its small and reduced size helps it to quickly find its place in your pocket or in your bag.
There are several methods to do the programming
Open the casing of your already-programmed remote. You will see a row of programmable switches that are in ON or OFF position.
Open the casing of your new remote, you will see a row of small programmable switches.
Set them in the same position as those in your already-programmed remote.
Your new remote control is programmed.
Open the casing of your receiver located next to your motor. You will see on the receiver circuit board a row of programmable switches that are in ON or OFF position.
Open the casing of your new remote, you will see a row of programmable numbered switches.
Set them in the same position as those in the receiver.
Your new remote control is programmed.
-Some remote controls contain one or two pair of supplementary programmable switches which are separate from the main row. These switches must also be set in the same position as those in the already-programmed remote.
-If this method does not work, try again by reversing the positions of the small switches with regard with the receiver or to your already-programmed remote control.
Finding it hard to program your CAME TOP432S gate remote control ?
No need to worry, our team is available to help using our skills. First of all, consider looking through the programming instructions sent with each TOP432S remote control. Remote Control Express also provides tutorials for most CAME remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
With the choice of a CAME remote control, you choose a quality product of one of the market leaders for home automation, garage doors and security technology.
In order to improve the quality of life of the customers CAME offers a wide range of remote controls for gates and garages.
No matter if you are a private person who wants to protect his house or a professional who wants to protect his business. Choose CAME for garage doors and gates.
Among the online references available, we offer you the remote controls Came TOP432EE, the TOP302A, the Came TOP432S, the TOP434EV or the Came TOP862EV. Whatever you need, you can easily find the remote for garages and gates of Came.
We as an expert in the sale of CAME remote controls for garage doors and gates, help you to purchase the right item. Order in a few clicks and get it delivered quickly and safe.
Why order your CAME TOP432S remote control on Remote Control Express?
-Advantage 1 :
Wishing to take delivery of quickly? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your CAME TOP432S gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. As a result you can quickly start using your CAME TOP432S remote control.
Our online store will lead you through each stage of the process of buying your CAME TOP432S remote control.