order 2 remotes
Reference : : TOP432EE
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Auto-programming|
|Type of battery||CR2016-X2|
|Dimensions||10 x 5 x 2 mm|
|Battery and instructions included||Yes|
|remote control||CAME TOP434EE|
CAME TOP432EE remote control exists in two colours: grey and black which are perfectly identical and compatible models, only the colour of the casing differs. Came with the reference TOP432 EE is a 2-button gate transmitter that uses the frequency 433.92 MHz.
The original TOP432EE remote control will allow you to control easily and remotely your engines! It stands out for its aesthetic appeal because its case has an elegant shape thanks to its rounded lines. This gate beep is programmed from an already-programmed CAME remote control, TOP series. This is called self-learning programming. With only two buttons, the Came TOP 432EE remote control is very easy to use and to handle!
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your CAME TOP432EE gate opener.
Note: This gate transmitter replaces the model CAME TOP 432 EV and it’s the most used model of the brand.
This remote is available in 4 buttons version, it’s the model CAME TOP434 EE.
NOTE: This portal remote control uses the frequency 433.92 MHz, in perfect compatibility with all radio receivers of the TOP series and has a self-learning function with the same programming procedure as TOP-432NA et TOP-432EV.
ATTENTION: CAME TOP432EE (frequency 433.92 MHz) is not compatible with CAME TOP862EV (frequency 868.35 MHz).
Came TOP 432EE gate opener can copy the code of your old remote control of the same manufacturer and operates without any problem on your motorization system. We explain below how it works!
The remote control’s operation
CAME RE432 receiver is ideal for this garage door transmitter. The programming of the 2-channel remote control is quite simple, you only need an old transmitter or an already-programmed one.
CAME TOP 432 EE remote control replaces the following Came gate remotes:
It is compatible with the following Came gate remotes:
If you do not possess an already-programmed transmitter, it is possible to register the new CAME TOP432EE bi-channel remote control directly in the receiver. The remote control needs a CR2016-X2 battery as power supply. It uses FIXED digital coding with 4090 combinations. The range is much higher, 100m outside and 35m inside, test about 50m from the barrier in front of a small obstacle and still works very well!
The remote control uses 2 channels and allows the use of 2 gate and garage door automation.
Good to know
To secure the entrance of your property at any time, you must use a perfectly functional gate beep. If there is any malfunction, it is necessary to replace the Came remote control.
Finding a model compatible with your gate automation is often complicated. However, the self-learning function can simplify things. A gate opener with this option is actually able to copy the commands from the current transmitter.
This, of course, involves a programming step.
The Came TOP 432EE remote control is only 68 mm long, 32 mm wide and 12 mm thick, so it is quite small and can fit perfectly in the hand. Its transport is so easy. You can hang this garage door opener on your keyring so you don’t lose it. You can also put the transmitter in your purse or pocket.
This remote control has two buttons, grey or black, depending on the colour of the remote control. The construction of this new CAME portal transmitter is more robust than the old model and promises remarkable resistance and longer life thanks to its new polycarbonate casing.
1- Programming from an already programmed remote control:
Simultaneously press the two upper buttons on your new remote control until the LED flashes faster.
Then, press the button you wish to program until the LED lights up fixed.
Within ten seconds of the last operation, press the button on your old transmitter and hold it down. When the keyfob flashes 3 times, it means that the programming is successful!
2- Programming from the receiver:
Open the receiver box located next to your motorization.
Locate the programming button and press the button on your new transmitter and the button on your receiver simultaneously.
Release the buttons, your remote control is well programmed!
Can’t seem to program your CAME TOP432EE key fob transmitter?
Fear not, our team is available to assist using our wealth of experience. Firstly, consider looking through the programming instructions sent with each TOP432EE remote control. Remote Control Express also provides tutorials for most CAME remote controls. If you need any more help or further information, call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
The CAME TOP 434NA is the new version of the TOP 434MA that is fully compatible with the TOP 432EE, so the 434NA is just as compatible
Change consists of three major steps:
Unscrew the remote control from below
The first step in replacing a remote control battery is to unscrew it. Use a small screwdriver to remove the fixing screw.
Remove faulty batteries
Once the remote control has been unscrewed, you can access the battery compartment. Remove them gently and carefully.
Insert the new batteries and close the remote control
Once the defective batteries are removed, the slot is ready to accommodate the new batteries. It is important to respect the position of the battery when opening the remote control. Once the batteries are in place, all you have to do is close the remote control. You can now use it!
If you want to know more about batteries, read our article on how to change them.
Receivers and transmitters are often locked for security reasons for condominium installations.
You live in a condominium or in a collective dwelling that has a gate automatism used by several residents. In this case, you may not be able to program your keyfob yourself in self-learning.
Before proceeding with the programming, it is essential that you check with your installer or syndic of co-ownership to find out if the automated system or parking motorization is blocked or not. Indeed, for security reasons, it is possible that your receiver is locked by the installer, or that the remote control you own is protected against any copy. We strongly recommend that you get in touch with your trustee to explain how to proceed.
With the choice of a CAME remote control, you choose a quality product of one of the market leaders for home automation, garage doors and security technology.
In order to improve the quality of life of the customers, CAME offers a wide range of remote controls for gates and garages.
No matter if you are a private person who wants to protect his house or a professional who wants to protect his business. Choose CAME for garage doors and gates.
Among the online references available, we offer you the remote controls Came TOP432EE, the TOP302A, the Came TOP432S, the TOP434EV or the Came TOP862EV. Whatever you need, you can easily find the remote for garages and gates of Came.
We as an expert in the sale of CAME remote controls for garage doors and gates, help you to purchase the right item. Order in a few clicks and get it delivered quickly and safely.
Why buy your CAME TOP432EE remote control on our online store?
-Advantage 1 :
Wishing to receive your order as soon as possible? Choose 24-hour delivery anywhere in the United Kingdom.
-Advantage 2 :
Purchase multiple remotes and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your CAME TOP432EE gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your item.
Remote Control Express will lead you through each stage of the process of buying your CAME TOP432EE remote control.