order 2 remotes
Reference : : TXP433A02NO
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||5.5 x 1.3 x 3 cm|
|Battery and instructions included||Yes|
|This remote replaces||TELECO TXP-433-A02|
TELECO TXP-433-A02 is a gate remote control available only in one colour which is black. This remote control is replaced by and fully compatible with the new model TELECO TXP-433-A04 with 4 buttons. The TELECO with the reference TXP-433-A02 is a remote for gates, it has 2 buttons and operates under the frequency 433.92 MHz.
To improve your daily comfort when using your motorized garage door, TELECO TXP-433-A02 remote control is the best option. By investing in this type of transmitter, you are choosing a convenient and reliable gadget.
A rolling code remote control which programming is done with the receiver, the garage door opener has two buttons and is easily used by its rectangular shape.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your TXP-433-A02 gate remote control.
NOTE: This gate opener is compatible with all the products TELECO-433 using the frequency 433 Mhz.
WARNING: If your remote control is white then the correct model is the Teleco TXP-868-A02, which is not compatible. Transmitters with different frequencies are not compatible.
Please note: If is written Elero, Tousek or Crawford on the casing of your remote control, this remote will not be compatible. We do not have any replacements for Elero remotes.
If the ring around the buttons on your remote control is exactly of the same colour as the rest of the casing (dark grey), then the model displayed here is not compatible. The correct one would be the TELECO TAK 868 which is used for co-ops and can only be programmed by a professional. Please contact your property management company to get this remote control.
The remote control’s operation
TELECO TXP-433 a 2-channel remote control using the frequency 433.92Mhz with a fixing clip for central home automation TELECO. This handheld transmitter is compatible with all TELECO radio receivers working with frequency 433 Mhz.
Uses a Rolling code system with self-learning function and easy programming procedure from the receiver.
Teleco TXP-433-A02 remote control replaces the following Teleco gate remotes:
It is compatible with the following Teleco gate remotes:
TXP-433-A02 a 2-channel keyfob that controls all the movements of your gate and garage door...etc according to your specifications. The frequency of this item is 433.92 Mhz.
As for its programming, the device has an auto-programming system with 0 switch, you have to do the programming in the receiver.
TELECO TXP-433-A02 a 2-channel rolling code key fob with a small size, it is powered by a battery type CR2032. A distance up to 100 meters. It has a rolling code type encoding that guarantee absolute security because it’s impossible to clone or copy the transmitter.
The registration of the Teleco TXP A02 only takes a few minutes and the programming requires no special equipment.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipment, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
TELECO TXP 433 A02 remote control is only 54 mm long, a width of 34 mm and a thickness of 13 mm. Its reduced size and light-weight make it very simple to handle and easy to use. The handheld transmitter is elegant and portable with compact design, can be used as a keyring or keyfob. It is also a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. The item is provided with a fixing clip for more convenience!
Programming of your new remote control:
There are several ways to program your new remote control
Approach your motor so you are standing a few feet away, press the button P3 behind your already-programmed remote with a sharp object. The receiver emits a beep.
Press the button you wish to program on your new remote control. Let it go, the beep stops and then starts again for 5 seconds.
Press the same button on your new remote again until the receiver beeps occasionally. Then wait 10 seconds.
Your new remote control is programmed.
Open the casing of your receiver located next to your motor. Press the button P1 on your receiver board. Keep it pressed down until the receiver emits a beep.
While keeping the button P1 pressed down, press the button you wish to program on your new remote control. Keep it pressed down until the receiver emits beeps occasionally.
Let the button go and wait 10 seconds.
Your new remote control is programmed.
Finding it hard to program your TELECO TXP-433-A02 gate remote control?
No worries, we are here to help using our expertise. First of all, consider looking through the programming instructions delivered with each TXP-433-A02 remote control. our online store also provides tutorials for most TELECO remote controls. If you need any more assistance, call our free helpline. One of our specialists will take you through each step in order to support you program your remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
Some TELECO remote controls are impossible to get programmed by yourself. If that's the case you have to contact the owner or installer of the receiver in order to get the knowledge to program your new TELECO remote control.
TELECO was founded in the 70s and first specialised in the production of receivers for televisions but as time passed they shifted more into the production remote controls for garages.
We provide you TELECO remote controls that are 100 % original and you also receive a guarantee of 2 years.
It is mandatory to choose the right TELECO remote which is compatible with the receiver of your garage
The brand TELECO offers you a large choice of remote controls in your catalogue. To find the right TELECO remote control under this vast choice of remotes you have to know the reference number of your current remote or your receiver in order to be sure, that your chosen remote control is compatible with your receiver.
Do you still have problems identifying the right TELECO remote control? In this case, we'd like to offer you some help in finding your TELECO remote control. Our customer service is available from Monday to Friday from 8h30 to 20h and from Saturday from 9h to 13h via phone, fax and email.
Why buy your TELECO TXP-433-A02 remote control on our online store?
Hoping to take delivery of as soon as possible? Choose 24-hour delivery anywhere in the United Kingdom.
Purchase multiple remotes and save money by taking advantage of our shipping offers.
Wanting to save time and be able to use your TXP-433-A02 remote control immediately? You’ll be glad to know that all our products come with batteries. As a result, you can quickly start using your item.
Our website will lead you through each stage of the process of buying your TELECO TXP-433-A02 remote control.