Your remote control TC4E has been added to your cart
useful equipment for your remote control
« Simple programming without additional material ! »
PRASTEL TC4E remote control available only in one colour which is black. This remote control can be ordered as a replacement for the old model PRASTEL TC2E. The PRASTEL with the reference TC4E is a 4 button remote for gates, using the frequency 433.92 MHz.
To improve your daily comfort when using your motorized gate, PRASTEL TC4E remote control is the best option. By having this type of transmitter, you will reduce your efforts everytime you want to use your gate.
The original PRASTEL TC4E remote control will allow you to control your motorized gate remotely in a very simple way !
This transmitter is programmed with the receiver. It has 5 buttons and is easily used by its small size.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your PRASTEL TC4E gate remote control.
If you live in a co-op, please verify with your building management that the receiver is not locked. If it is, you will not be able to program your new Prastel TC4E remote.
ATTENTION: The inscription “PRASTEL TC4E” is written on the back of your remote control. If you see no inscription, so it’s a copier remote control. if you see the inscription "SURETE 2000" on the back of the casing, then it is a copier remote control which is not compatible with the model displayed here. If you see this inscription, then you will have to install a radio receiver.
WARNING: Some remotes have yellow or red buttons - they are not compatible!
The remote control’s operation
Prastel MRC4E receiver is ideal for this gate remote control. The programming is quite simple because it’s done with the receiver using the tool GT+ without opening the blister ! It operates under a radio frequency of 433.92 MHz.
PRASTEL TC4E remote control replaces the following Prastel gate remotes:
PRASTEL MPSTP2E blue
It is compatible with the following Prastel gate remotes:
The 4 button hand transmitter can support all PRASTEL receivers and 433,920 MHz frequency transmitters.
Note: This is not a “universal copier remote control”, so it can not be copied in the receiver and is a Rolling code type and not a fixed code one. Only fixed code transmitters can be copied with “copier remotes” without passing through the receiver.
PRASTEL TC4E 4-button remote control with a modern design, it is powered by a long lithium battery life 3V battery type CR2032. A distance up to 100 meters, and a range up to 100 meters free field, local conditions can influence the range of the remote control !
XP, RW and battery-saving features. A 4 channel Rolling code remote control. Easy transmission of the coding and the programming only takes few minutes. It has a blue LED of signaling.
Good to know
If you have a problem with your transmitter, it is possible that the registration function from the remote control is disabled in the receiver. In such case, it will be required to involve the guardian or the syndic, because you will need to access to the internal drive of the receiver.
NOTE: If you live in a residential condominium unit, this gate opener may fail to initialize, so please consult the installer for more information on this issue. However, no need to worry if you live in an individual house because the installation will not be blocked.
The Prastel key fob is available in 2 buttons PRASTEL TC2E or in 4 buttons, but only in one colour which is black.
Prastel TC4E remote control is only 50 mm long, a width of 30 mm and a thickness of 12 mm - 30g. Its small and reduced size makes it very simple to handle and easy to use, it may be used as a key chain along with car keys. The handheld metallic transmitter is a shock-resistant device with a good performance in hand, the buttons are robust and tiny. Very elegant: black case, metal edging and modern chrome accents.
Programming of your new remote control:
There are two ways for programming your new remote control
1- With an already programmed remote control:
Go closer at one meter to your motor and press simultaneously the two top buttons of your already programmed remote control.
When the LED lights up, press simultaneously the two top buttons of your programmed remote. The LED flashes slowly when it stays lit, release the buttons.
Then press the button you wish to program on your new remote, for 2 seconds.
Wait 10 seconds, your new remote control is programmed.
2- Receiver-based programming:
ATTENTION: keeping the programming button of your receiver pressed down too long, will erase the programming code of all the remote controls that have already been programmed
Open the case of your receiver located next to your motor. Press the programming button MEMO on the receiver board, until the LED on the receiver flashes.
Press the button you wish to program on your new remote control and keep it pressed down. The LED on the receiver blinks then remains constantly.
Let the button go, the LED on the receiver turns off.
Wait 10 seconds, your remote control is programmed.
Finding it hard to program your PRASTEL TC4E gate remote control ?
No need to worry, our team is here to assist using our expertise.
Firstly, consider looking through the notice sent with each TC4E remote control. Our online store also provides tutorials for most PRASTEL remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Press the functional button on your old remote control till the LED flashes
Press the button you want to copy on your new remote, the red LED flashes slowly
Once the code memorized, it flashes rapidly.
Your remote control is now copied !
PRASTEL is one of the specialists in the motorization area. Discover remote control solutions with years of experience to optimize your comfort.
Created in 1980, PRASTEL France has the know-how and technology to develop innovative safety solutions and automation systems. To protect your apartment from unwanted intruders or to control the access of people and vehicles, trust in PRASTEL products.
Among the products offered by this well-known brand, we are offering, for example, the remote PRASTEL MPSTF3E, the remote PRASTEL TC4E or the remote Prastel KMFT4P 26.995 MHz. All PRASTEL remote controls for garage doors or gates are available in our catalog in several clicks.
Easy to use, the remote controls of PRASTEL for garage doors or gates will make life easier for you.
Moreover, our website offers a simple shopping process so you can order your PRASTEL remote control simple and be delivered very fast. Don’t hesitate and order right now!
Why order your PRASTEL TC4E remote control on our online store?
-Advantage 1 :
Hoping to take delivery of fast? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your PRASTEL TC4E gate remote control immediately? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your PRASTEL TC4E remote control.
Our website will lead you through each stage of the process of buying your PRASTEL TC4E remote control.
|Frequency||433.92 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||4|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||52 x 32 x 12 mm|
|Battery and instructions included||Yes|