order 2 remotes
Reference : : 4790830
The advantages of Remote Control-Express:
|Model||HSM4 868 MHz|
|Number of buttons||4|
|Type of programming||Auto-programming|
|Type of battery||12V(23A)|
|Dimensions||60 x 14 x 25 mm|
|Battery and instructions included||Yes|
|This remote replaces||APERTO 4025, SOMMER 4025, HENDERSON 4025, SOMMER 4025-BLUE, SOMMER 4026 TX03-868-2, SEA 433-SMART-2-SWITCH, SEA 433-SMART-3-SWITCH, ALLDUCKS 6203 P, ALLDUCKS 6204 ROLLING CODE, CRAWFORD AKHS 433-54, ALLMATIC BRO4WN RED, MOTOSTAR CLICK 4M, MOTOSTAR CLIKSTAR 2, MOTOSTAR CLIKSTAR 4, MARANTEC D214 WOOD-433, CRAWFORD EA433 4K, ELVOX ET03 433MHZ, ELVOX ET04 433MHZ, ELVOX ET2 433MHZ, SIMPLE EVO, DEA GENIE, DEA GENIE wood, HÖRMANN HS1 868 MHZ, TUBAUTO HS2 868 MHZ, HÖRMANN HS2 868 MHZ, GARADOR HS4 868 MHZ|
GARADOR HSM4 868Mhz remote control available only in one colour which is black with blue buttons. This remote control is fully compatible with the HÖRMANN HSM4 868 MHZ. The GARADOR with the reference HSM4 868 Mhz is a 4 button remote control gate opener, using the frequency 868 MHz.
To improve your daily comfort when using your motorized gate, GARADOR HSM4 remote control is the best option. By investing in this type of transmitter, you are choosing a convenient and reliable gadget.
A remote control with an auto-programming system, the gate opener has four buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your GARADOR HSM4 gate remote control.
Note: Remote controls with different frequencies are not compatible.
Warning: Please be sure to choose a model that has buttons of the same colour as your current remote. The model displayed here has blue buttons, do not confuse it with the Garador HSM4 40MHz, which has grey buttons.
ATTENTION: Please note that the colour of the buttons for this brand determines the frequency. Remote controls with different frequencies are not compatible. Please choose a model that has buttons of the same colour as your current remote control. The model displayed here has blue buttons.
NOTE: With Hormann, the frequency is related to the colour of the buttons (except models HSP / HSC / HSD).
Blue Buttons = 868 MHz, Grey Buttons = 40.685 MHz, Green Buttons = 26.975 MHz
GARADOR HSM4 868Mhz remote control operates with a frequency of 868 MHz to emit signals to the receiver and is powered with a battery 12V, an excellent voltage to optimize the good autonomy of the device.
The programming is quick and simple because it’s a self-learning device
GARADOR HSM4 remote control replaces the following Garador gate remotes:
GARADOR HSM4 868 Mhz 4-channel transmitter that controls all the movements of your gate or garage door according to your specifications. The frequency of this item is 868 MHz.
As for its programming, the device has a self-learning system, so it’s an auto-programming type.
GARADOR HSM4 remote control with 4 blue buttons for garage door operators and automatic closing systems. This model is powered by a 12V battery type 23A. A 4-channel hand transmitter with a range up to 30 meters in open space, local conditions, power cables, transmission towers, concrete, can influence the range of the remote control!
The registration of the Garador HSM4 868Mhz keyfob only takes a few minutes and the programming requires no special equipment.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate.
It is important to know that there are three types of programming (coding systems): Switches, auto-programming, and programming in the receiver.
To choose the correct remote control, it is highly recommended to consider the following criteria: the brand, the frequency, don’t neglect either the number or the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products.
Garador hsm4 868Mhz remote control is only 60 mm long, a width of 37 mm and a thickness of 12 mm. If you are looking for a good remote control and easy to use, choose right away the HSM4 40Mhz. This model is highly efficient, its reduced size makes it very easy to handle. It is also a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
CAUTION: The coding process will incite the opening of your garage door. To avoid an accident, we recommend that you program your remote control while inside your garage
Note: The learning procedure will be interrupted if you release the button on the learning transmitter during the slow flashing.
Programing of your new remote control :
Place the transmitter that is to “teach” the code (teaching transmitter) and the transmitter that is to learn the code (learning transmitter) directly next to one another.
Press and hold the button on the teaching transmitter. The LED will light up and remain lit.
Immediately afterwards, press and hold the button on the learning transmitter - the LED on the learning transmitter will flash slowly for 4 seconds and then starts flashing more rapidly when the learning procedure was successfully completed.
Release all the buttons and check that the new remote works correctly!
If the transmitter does not function correctly, repeat steps 1-4.
No worries, our team is here to assist using our skills. Firstly, consider reading the information sent with each HSM4 868 MHz remote control. Remote Control Express also provides tutorials for most GARADOR remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
If you have lost your original remote control, or you no longer have a working one then you will need to program your new one using the receiver unit.
This procedure will erase all the existing programmed remotes.
NOTE: The receiver unit and programming procedure may differ slightly depending on the model of the operator you have.
First, locate the receiver unit and locate the programming button. On older units, this will be a small red button on the receiver unit, whereas on newer models - such as the GaraMatic 9 or 10 - the button will be marked 'P' or 'Prg'.
Press the button briefly, and then take the new remote control and hold down the button you wish to learn the code. The light on the handset should begin flashing for a few seconds before stopping once it has learnt the new code.
Garador is one of the UK’s leading manufacturers of garage doors, front doors and operators, with an ultra-modern production facility located in Yeovil, Somerset. Utilising German engineering expertise, the brand has developed a range of garage doors that are unsurpassed in the industry. The current Garador range is the result of more than 50 years’ experience building garage doors.
Although originally established as engineers in 1948, Garador was the only manufacturer to produce one piece up and over garage doors in the UK during the 1950s.
Now, as well as offering steel, timber and GRP up and over garage doors, they also supply steel and timber side hinged doors.
Why order your GARADOR HSM4 868 MHz remote control on Remote Control Express?
- Advantage 1 :
Wanting to take delivery of quickly? Choose 24-hour delivery anywhere on United Kingdom soil.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Hoping to save time and be able to use your GARADOR HSM4 868 MHz gate remote control right now? You’ll be glad to learn that all our remote controls come with batteries. As a result, you can quickly start using your GARADOR HSM4 868 MHz remote control.
Remote Control Express will lead you through each stage of the process of buying your GARADOR HSM4 868 MHz remote control.