order 2 remotes
Reference : : RCU 433 4K
The advantages of Remote Control-Express:
|Model||RCU 433 4K|
|Number of buttons||4|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||4 x 7 x 2 cm|
|Battery and instructions included||Yes|
NORMSTAHL RCU 433 4K remote control available only in one colour which is black with silver edges. This remote control is a replacement for the old model NORMSTAHL EA433 4K (grey remote with blue buttons). The NORMSTAHL with the reference RCU433 4K is a 4 button remote for gates, using the frequency 433.92 MHz.
Do you need to use an accessory that would meet your comfort and safety needs? We recommend that you take a look at the NORMSTAHL RCU 433 4K transmitter. Its performance allows you to control access to your home.
With its rectangular shape and thinness, it offers a good grip. If you require a remote control that is completely easy to use, you should know that this device has 4 distinct buttons. It is also a very resistant beeper. This allows you to take advantage of its lifespan.
NORMSTAHL RCU 433 4K also promises easy programming procedure. Indeed, it registers in the receiver of your equipment.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your RCU433 4K gate remote control.
Attention: This transmitter is not compatible with drives for the Ultra and Ultra Excellent series built before 2004.
NORMSTAHL RCU433 4K is ideal to control your motorized gate and garage doors. This transmitter operates on self-learning mode (auto-programming device).
Warning: The old compatible model NORMSTAHL EA 433 4K that operates under the same frequency is replaced by the RCU433 4K.
Note: The model NORMSTAHL RCU433 2K is the 2-button version of the Normstahl RCU433 4K model.
Note: It fits perfectly with the control unit part number 400933140. This transmitter is also able to replace several beeps.
NORMSTAHL 400933140 radio receiver is suitable for this gate remote control and is compatible with all NORMSTAHL versions. The programming is quite simple because it’s done with the receiver or by using your old remote control! It operates under a radio frequency of 433.92 MHz and is powered with a battery 3V.
Normstahl RCU 433 4K remote control replaces the following Normstahl gate remotes:
It is compatible with the following Normstahl gate remotes:
Normstahl rcu433 4k remote control has four blue buttons that control your garage door and your motorized gate. The frequency of this remote is 433.92 MHz.
The gate key fob is ideal for all NORMSTAHL automation systems and allows all gates or garage doors operating on the 433MHz frequency.
As for its programming, the transmitter is auto-programming using a Rolling code.
Normstahl RCU 4334K a 4 channel remote control with an innovated design, it is powered by a 3V battery type CR2032. A range up to 100 meters!
Self-learning device (rolling code system) and easy programming with the receiver that requires no special equipment.
The Normstahl Rcu433 4K is very convenient for residential use and multi-user systems.
By choosing this quality remote control, you will have the chance to make your daily life easier. This device also gives you the possibility to control the opening and closing of your gate or garage door. Because of its importance, you need to think about the proper functioning of your device. If you think that it no longer works as it used to, we advise you to replace it with a model that is perfectly adapted to the automation of your equipment.
Normstahl rcu433 4k remote control is only 50 mm long, a width of 24 mm and a thickness of 7 mm. Its small and reduced size make it very simple to handle and easy to use, it may be used as a key chain along with car keys. The handheld ergonomic transmitter is a shock-resistant device with a good performance, the buttons are robust and tiny. Very elegant: black case, grey buttons and modern casing.
Approach your motor so you stand a few feet away from it. On the motor, press the programming button 1 and let it go.
Press a button on your new remote control for 1 second.
Wait 10 seconds.
Your new transmitter is programmed.
Fear not, our team is here to help using our skills. Firstly, consider reading the notice delivered with each RCU 433 4K remote control. Remote Control Express also provides tutorials for most NORMSTAHL remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step to help you program your gate remote control.
You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Normstahl GmbH, founded in 1946, now belongs to a large Swedish group and has been operating as Entrematic in this organisation since 2012. Our customers have been relying on us, one of Europe's largest garage door manufacturers, for many decades. That's why we are continuing to market our products under the Normstahl product brand.
Normstahl garage doors and operators have stood for premium quality, reliability and absolute safety for 70 years. Our products are as individual as the needs of the people who use them every single day. What's more, the name of our "Normstahl" product brand, under the Entrematic corporate brand, is no accident: Normstahl stands for absolute compliance with standards and zero-deviations from the premium quality for which we stand as a renowned garage door manufacturer. This makes it possible for us to provide a 10-year manufacturer's warranty on each of our door parts.
NORMSTAHL brand offers a broad experience in designing and developing gate remote controls.
The remote controls of the brand NORMSTAHL for garage doors are manufactured in Germany and run at a frequency of 433 MHz. If you're looking for NORMSTAHL remotes, you can find them at Remote Control Express!
Replace your old remote controls within a few clicks on our website. All remotes of the brand NORMSTAHL sent within 48 h and you get them with batteries and instructions.
Why buy your NORMSTAHL RCU 433 4K remote control on Remote Control Express?
- Advantage 1 :
Hoping to receive your gate remote control fast? Choose 24-hour delivery anywhere in the United Kingdom.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Wanting to save time and be able to use your NORMSTAHL RCU 433 4K gate remote control straight away? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your NORMSTAHL RCU 433 4K remote control.
Our online store will lead you through each stage of the process of buying your NORMSTAHL RCU 433 4K remote control.