CRAWFORD EA433 4K
KING-GATES KIT FRED MYO2 - 2 MYO 4C
Reference : :
|Number of buttons||4|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||6 x 4 x 1 cm|
|Battery and instructions included||Yes|
|This remote replaces||IUPPITER 1-30875 , EXTEL 141-1, SCIAR 141-1, SAFARI 2, TREBI 224 TX2, TREBI 224 TX4, SOMFY 224-1, PROMATER 224-1, PROMATER 224-2, TAU 250TX02E, TAU 250TX04E, GENIUS 252, CASALI 252, POWERDOOR 252, GENIUS 252 NEW, GENIUS 254, CASALI 254, POWERDOOR 254, TAU 26TX2, TAU 26TX4, SEA 30.900 MHZ -2, SEA 30.900 MHZ -4, IUPPITER 306 , MULTICODE 3079 40.685MHZ, SEA 30900-1 OLD, SEA 30900-2 OLD|
CRAWFORD EA433 4K remote control available only in one colour which is silver. This remote control is replaced by the new compatible model NORMSTAHL RCU 433 4K (black remote with grey buttons). The CRAWFORD with the reference EA433 4K is a 4 button remote for gates, using the frequency 433.92 MHz.
To improve your daily comfort when using your motorized gate, CRAWFORD EA433 4K remote control is the best option. By having this type of transmitter, you will reduce your efforts everytime you want to use your gate.
The original CRAWFORD EA433 4K remote control will allow you to control your motorized gate remotely in a very simple way !
This transmitter is programmed with the receiver. It has 4 blue buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your EA433 4K gate remote control.
CRAWFORD EA433 4K is used for monitoring your gate and garage doors automatic systems. This white case operates on self learning mode (auto-programming).
Attention: The new compatible model NORMSTAHL RCU 433 4K that operates under the same frequency is a replacement of the EA433 4K.
Note: This transmitter exists in two buttons, it’s the CRAWFORD EA433 2KM model.
The remote control’s operation
A high quality original CRAWFORD EA433 4K remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 3V.
The programming is done with the receiver. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
Crawford EA433 4K remote control replaces the following Crawford gate remotes:
It is compatible with the following Crawford gate remotes:
Crawford EA433 2KS
Crawford EA433 4KM
Crawford EA433 4KS
Crawford RCU 433 2K
Crawford RCU 433 4K
We supply a radio receiver compatible with all NORMSTAHL versions and with some CRAWFORD models (CRAWFORD EA433 4K, EA433 2KM, T433-4, AKHS 433-54) as the one displayed here : NORMSTAHL 400933140.
Crawford EA433 4K gate key fob is equipped with four blue buttons that control all the movements of your garage door according to your specifications. The frequency of this item is 433.92 MHz.
The remote control is suitable for all CRAWFORD gate automation systems and allows all automatic gates or garage doors operating on the 433MHz frequency.
As for its programming, the device is a Rolling code auto-programming type. It is easily programmed from an existing remote or from the receiver.
Crawford EA4334K a 4 channel remote control with an innovated design, it is powered by a 3V battery type CR2032. A range up to 100 meters !
Self programming device (rolling code type) and easy programming with the receiver that only takes few minutes.
The Crawfrod EA433 4K is very practical and useful in multi-user systems and residential use.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
Crawfrod ea433 4k remote control is only 65 mm long, a width of 40 mm and a thickness of 15 mm. Its small and reduced size makes it very simple to handle and easy to use. It is very ergonomic and has four blue buttons in silver/white casing. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
Programming of your new remote control:
On the CRAWFORD motorization, find and press the button , then let it go a LED flashes.
Press a button on your new remote control for 2 seconds, when the LED flashes it means that the programming is successful.
Wait 10 seconds, your new remote control is programmed !
Finding it hard to program your CRAWFORD EA433 4K gate remote control ?
No need to worry, our team is here to assist using our expertise.
Firstly, consider looking through the notice sent with each EA433 4K remote control. Our online store also provides tutorials for most CRAWFORD remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Press the button and keep it pressed down for more than 5 seconds. The LED starts to flash and then goes off, which means that the operation is done with success.
Normstahl GmbH, founded in 1946, now belongs to a large Swedish group and has been operating as Entrematic in this organisation since 2012. Our customers have been relying on us, one of Europe's largest garage door manufacturers, for many decades. That's why we are continuing to market our products under the Normstahl product brand.
Normstahl garage doors and operators have stood for premium quality, reliability and absolute safety for 70 years. Our products are as individual as the needs of the people who use them every single day. What's more, the name of our "Normstahl" product brand, under the Entrematic corporate brand, is no accident: Normstahl stands for absolute compliance with standards and zero-deviations from the premium quality for which we stand as a renowned garage door manufacturer. This makes it possible for us to provide a 10-year manufacturer's warranty on each of our door parts.
CRAWFORD, from NORMSTAHL brand, offers a broad experience in designing and developing gate remote controls.
The CRAWFORD Remotes controls for gate or garage door motorization are often remotes from the brand NORMSTAHL. In any case, you can find the remote control for CRAWFORD drives on our website Remote Control Express!
Replace in a few clicks your CRAWFORD remote control and get it delivered in 48 hours. Programming instruction for free, guide available online to download and video tutorial.
Why order your CRAWFORD EA433 4K remote control on our website?
-Advantage 1 :
Wanting to take delivery of quickly? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Hoping to save time and be able to use your CRAWFORD EA433 4K gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your CRAWFORD EA433 4K remote control.
Our online store will lead you through each stage of the process of buying your CRAWFORD EA433 4K remote control.