Reference : : 6900911
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||9 x 6 x 2 cm|
|Battery and instructions included||Yes|
NICE ON2E remote control only available in one colour which is black with a white back. This remote control is replaced by the 4-button model NICE ON4E which is 100% compatible. The Nice with the reference ON2E is a 2 button remote for gates, operating under the frequency 433.92 MHz.
NICE ON2E remote control allows you high-security and comfort. Indeed, this equipment will permit to easily open and close your engines by making your daily life easier. This transmitter is highly coveted thanks to its sober design and black casing that give it great elegance. The shape of its buttons and the way they are placed optimize its originality.
Its square shape, which is out of the ordinary, make it a very original and easy to use and to operate thanks to its two buttons. Moreover, it is very easy to program, the programming is done with the receiver and the operation does not require any specific equipment.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your NICE ON 2E gate remote control.
NOTE: You will sometimes find the name Nice ONE 2E for this remote control reference. It is exactly the same product.
ATTENTION: Not to be confused with the Nice ON2EFM model. The latter has a blue casing.
It is also important to know that these two models of remote controls are not compatible at all.
Your ON2E remote control is available in different models. You can find it in 1 button (Nice ON1E), 4 buttons (Nice ON4E) and 9 buttons (Nice ON9E). If you are looking for a replacement remote control, be aware that these transmitters are all compatible.
The rolling-code transmission allows you to have absolute security, guaranteed by the impossibility to clone the transmitter.
The programming is quick and simple because it’s done with the receiver.
NICE ON2E remote control replaces the following Nice gate remotes:
Series INTI : INTI1, INTI2
Series Flor-S : Flo2R-S, Flo4R-S
NiceWay: WM001C, WM003C, WM009C, WM240C
NICE ERA-ONE ON1E
It is compatible with the following Nice gate remotes:
Compatible with all Nice rolling-code remotes :
Series ONE (ON2, ON4, ON9)
Series INTI (INTI1, INTI2)
Series Flor-S (Flo2R-S, Flo4R-S)
Series NiceWay ( WM001C, WM003C, WM009C, WM240C)
Ideal and compatible with the following Nice receivers:
All roller shutter motors in the series Neoplus
ON2E remote control with 2 black buttons for garage door operators has a 72 bit O-Code with variable code. This model is powered by an extended battery life 3Vdc type CR2032. A 2-channel Rolling code hand transmitter type. It has a protection factor IP40 and operates under temperatures from -20°C to +55°C.
A distance up to 35 meters indoor and 200 meters outdoor, well-functioning !
The registration of the NICE ON2E transmitter only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
A gate remote control is an essential accessory that controls your motorized gate. To choose the good device, there are some of the criteria which must be considered. First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
NICE ON 2E remote control is only 56 mm long, a width of 45 mm and a thickness of 11 mm. It is so ergonomic and designed to last. Its small and reduced size makes it very simple to handle and easy to use. The gate remote is really resistant thanks to its tenacity and its impressive toughness even under strong pressure or shock.
This key fob only has two ergonomic buttons, and is delivered with a wall support!
There are several methods to program your new remote control.
From an already-programmed remote control:
1. Approach your installation (1 to 2 meters). Press a button on your new remote control for 5 seconds.
3. Slowly press 3 times a button on your already-programmed remote by waiting 1 second between each pressure. Each press lasts one second.
4. Press a button on your new remote control. Release it.
5. Wait 10 seconds.
6. Your new remote control is programmed.
From the receiver:
1. Open the case of your receiver located near your motorization.
2. On the receiver board, press the programming button (P1). Hold it down. When the receiver LED lights up. Release the button.
3. Press a button on your new remote control. Release it. The receiver led
4. Wait a second. Press the same button on your new remote control. Release it. The receiver LED flashes 3 times.
5. Wait 10 seconds.
6. Your new remote control is programmed.
No need to panic, we are available to assist using our know-how. Firstly, consider looking through the notice sent with each ON2E remote control. Remote Control Express also provides tutorials for most NICE remote controls. If you need any more help, call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
If you live in a co-op of more than 50 users, it is not possible to program a new remote, the radio receiver is intentionally locked by the system installer. Please check with you installer or your syndic for details if the system is locked or no.
If you live in an individual house, no need to worry, the installation is not locked and the programming is very easy.
Nice belongs to the group S.p.A. created in 1990 ; it’s an italian company listed on the Milan stock exchange. The subsidiary is founded in france in 1995 and is based at Aubagne in the department Bouches-du-Rhônes. It has 111 employees at the headquarters. The company achieved a turnover of about 200 million in the hundreds of countries where it markets its automations. Nice is characterized in the domotic market by its innovative design, not to mention the clean technologies of its series of automatisms that operate with solar energy. Moreover, Nice manufactures easy-to-use products in order to satisfy its clients. Nice is deeply committed in its programme FEEL to help persons with disabilities. Nice is specialized in the motorization of gates and portals, roller shutters and blinds.
Why order your NICE ON2E remote control on Remote Control Express?
- Advantage 1 :
Wanting to take delivery of fast? Choose 24-hour delivery anywhere on United Kingdom soil.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Wanting to save time and be able to use your NICE ON2E gate remote control immediately? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your NICE ON2E remote control.
Our website will lead you through each stage of the process of buying your NICE ON2E remote control.