order 2 remotes
Reference : : 122419
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Auto-programming|
|Type of battery||CR2032|
|Dimensions||10 x 6 x 6 cm|
|Battery and instructions included||Yes|
|remote control||MARANTEC D384-868|
MARANTEC DIGITAL 382-868 remote control only available in one colour which is grey. This remote control is a replacement to the old model MARANTEC D302-868. The Marantec with the reference D382-868 is a 2 button remote for gates, operating under the frequency 868 MHz.
To improve your daily comfort when using your motorized gate, MARANTEC D382-868 remote control is the best option. By investing on this type of transmitter, you are choosing a convenient and reliable gadget.
A remote control which programming is done with the receiver using a rolling code system, the gate opener has two buttons and is easily used by its small size.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your Marantec Digital 682-868 gate remote control.
ATTENTION : Do not confuse this model with the remote control of identical appearance MARANTEC DIGITAL 382-433 using the frequency 433.92 MHz.
MARANTEC D382-868 model operates with a frequency of 868 MHz.
These models are not compatible. In order to choose the right model, please check on the back of your remote control :
– If the back of the transmitter is of the same colour as the front, so it’s the model displayed here.
– If the back of the transmitter is darker than the front, so it’s the Marantec D382-433MHz model.
WARNING: If you have the old MARANTEC model: D211868, D212868, D214868, D221868 or D222868, you should take a programming cable.
The remote control’s operation
MARANTEC Digital 339-868 receiver is ideal for this gate remote control. The 2-channel remote control has a flashing red light “LED” and is compatible with all MARANTEC drives. It’s an auto-programming transmitter so it’s quick and simple to program because it’s done with the receiver.
Marantec D382-868 remote control replaces the following Marantec gate remotes:
It is compatible with the following Marantec gate remotes:
WARNING: MARANTEC DIGITAL 868 are not compatible with other 433 MHz remotes or operators.
D382-868 remote control with 2 grey buttons for garage door operators can control up to 2 Marantec drives, gate, garage door or Marantec receiver 868Mhz. This model is powered by an extended battery life 3V type CR2032 or a ZCP Marantec battery. A 2-channel Rolling code hand transmitter type with a distance up to 100 meters, is perfectly suited for residential use.
This fob operates on temperatures from –20 °C to +60 °C, and has special features such as: Multi-Bit radio system, unidirectional communication mode, and 281 000 billion combinations.
The registration of the D382 868 transmitter only takes few minutes and the programming requires no special equipments because it’s an auto-programming type. If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter.
There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
MARANTEC D382-868 remote control is 86 mm long, a width of 38 mm and a thickness of 10 mm. It is so ergonomic and designed to last. Its small size makes it very simple to handle and easy to use. The gate remote is really resistant even under strong pressure or shock.
This Marantec key fob only has two ergonomic buttons, making it simple to use!.
-Programming of your new remote control:
Connect your already-programmed remote control to your new remote control with the supplied clip. Then, press a button on your old remote control. Keep it pressed down till the LED light on your old remote illuminates.
While keeping the button pressed down, press the button you wish to program on your new remote control. Keep it pressed down. When the LED light on your new remote blinks then remains lit, let it go.
Repeat this procedure for each button you wish to program, wait 10 seconds.
Your new remote control is programmed.
-With the receiver:
Attention: Only use this programming method if you no longer possess any remote control that works. This programming method will erase all of your previously-programmed remotes.
Press and hold down the button P until the LED 2 blinks.
Press the button P several times until the LED 7 blinks.
Press the button on your new remote control. The LED 7 blinks more quickly.
Press the button P and then let it go. Wait 10 seconds.
Your new remote control is programmed.
Can’t seem to program your MARANTEC D382-868 gate remote control ?
No worries, we are available to help using our expertise. Firstly, consider looking through the programming instructions delivered with each D382-868 remote control. our website also provides tutorials for most MARANTEC remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
If you don’t have an old remote control or any remote control that works, then you have to do the programming with the receiver by following the steps already mentioned above.
Since 1957 the brand MARANTEC has been producing innovative products for the control of garage doors, gates, sliding doors and industrial doors. Based in Germany, MARANTEC manufactures high-quality products that comply with all applicable standards and are based on innovative patents. Furthermore the company has a quality management with DIN ISO 9001 standard since 2015.
Go to remotecontrol-express to purchase your matching Marantec remote control for your gate garage door drive. You can find all the references of the well-known company in just some clicks. Simply go online to buy your remote Marantec D302-868, the remote Marantec D304-868, the remote Marantec D302-433 or the Marantec CABLE-PROG-MARANTEC.
Take advantage of our experience in the online trade of MARANTEC remotes so you don’t order the wrong model. Order now the Marantec garage or gate remote you need. You get the goods fast and comfortably at your home.
Why order your MARANTEC D382-868 remote control on our website?
-Advantage 1 :
Wishing to receive your gate remote control fast? Choose 24-hour delivery anywhere on United Kingdom soil.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Hoping to save time and be able to use your MARANTEC D382-868 gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your MARANTEC D382-868 remote control.
Our online store will lead you through each stage of the process of buying your MARANTEC D382-868 remote control.