Your remote control GO PRO MINI STANDARD has been added to your cart
useful equipment for your remote control
« Simple programming without additional material ! »
JCM GO PRO MINI STANDARD is a small remote control available only in one colour black and white.This remote control can be ordered as a replacement for the GO PRO 2 868Mhz. The JCM with the reference GO PRO MINI is a Rolling Code remote for gates, it has 2 black buttons and operates under the frequency 868.35 MHz.
Is your Jcm go pro mini remote control defective ? Our website offers you a high-quality transmitter from the renowned JCM brand to replace your old item with a new compatible model. The original JCM GO PRO MINI remote control will make it very easy for you to control your motorized gate !
This transmitter is programmed with the receiver. Having 2 mini buttons and easy to handle thanks to its very reduced size.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your JCM GO PRO gate remote control.
ATTENTION: This gate remote can be manufactured by PORTIS, ATPE or FRESNAY, which are not compatible with the model displayed here manufactured by JCM. The brand is written on the casing, please check it before placing your order !
Not to be confused with the GO PRO MINI 433 (different frequency) which is not compatible !
This transmitter is compatible with the following receivers: JCM BASE500-2B, ACCES 500, WAVE 500, ACCESS 1000, STICK.
The JCM GO PRO MINI operates at temperatures of -20 ... +55°C.
The remote control’s operation
A high quality original JCM go pro mini remote with easy programming procedure from the receiver that requires no special equipment !
The JCM GO PRO MINI is a hand held transmitter for opening automatic doors and gates.
JCM GO PRO MINI STANDARD remote control replaces the following JCM gate remotes:
JCM GO PRO 4
It is compatible with the following JCM gate remotes:
The 2-button remote control has a new system of high security Rolling Code with more bit encryption.
NOTE: This remote control exists in several versions: JCM, ATPE, AXE, PORTIS, FRESNAY.
JCM GO-PRO MINI 2-channel rolling code key fob with a small size, it is powered by a long battery life 3V type CR2032. A distance up to 100 meters. It is compatible with all MOTION receivers.
Easy transmission of the coding and a high BIT encryption. The programming only takes few minutes with the receiver. Allowing up to 19 trillions combinations.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
JCM GO-PRO MINI STANDARD remote control is only 55 mm long, a width of 30 mm and a thickness of 10 mm. Its small and reduced size makes it very simple to handle and easy to use. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. The item is really resistant thanks to its impressive toughness even under strong pressure or shock.
A handy shock-resistant key fob !
Remark: If you press too long the button of your receiver, you run the risk of erasing the programming code of all of your remote controls that have been programmed.
Programming of your new remote control:
Open the casing of your receiver located next to your motor.
Press the programming button and let it go.
The LED on the receiver flashes.
Press a button on your new remote control.
Let the button go. The LED on the receiver turns off.
Your new remote control is programmed.
Finding it hard to program your JCM GO-PRO-MINI gate remote control ?
No need to worry, our team is here to assist using our expertise.
Firstly, consider looking through the notice sent with each GO PRO MINI remote control. Our online store also provides tutorials for most JCM remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
The programming of this remote control is not possible if you live in a co-op. The registration may be locked by the guard, in this case you should check with the syndic.
JCM Technologies specialist since 1983 in the home automation field and motorized gates. It become in few years the leader in the sector market in Spain.
It becomes international in 1991 after the expansion of its commercial subsidiaries in France and Germany. JCM is part of a group of the most famous brands in Europe in their area of activity and is present in 40 countries.
Why order your JCM GO PRO MINI STANDARD remote control on Remote Control Express?
-Advantage 1 :
Wishing to receive your gate remote control quickly? Choose 24-hour delivery anywhere on United Kingdom soil.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your JCM GO PRO MINI STANDARD gate remote control right now? You’ll be glad to learn that all our remote controls come with batteries. As a result you can quickly start using your JCM GO PRO MINI remote control.
Our online store will lead you through each stage of the process of buying your JCM GO PRO MINI STANDARD remote control.
|Model||GO PRO MINI STANDARD|
|Frequency||868.35 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!|
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||6 x 3 x 1 mm|
|Battery and instructions included||Yes|