GETRONIC GT 82 TXC REMOTE

Availability: Only 5 more products in stock

Shipping:

GETRONIC

Your remote control GT 82 TXC has been added to your cart

useful equipment for your remote control



Free postage order 2 remotes

Why choose the GETRONIC GT 82 TXC remote control ?

GETRONIC GT 82 TXC remote control only available in one colour which is black with black buttons. It’s an alarm remote control that guarantees the safety of your home.  The GETRONIC with the reference GT82 TXC is a 2 button remote, operating under the frequency 433.92 MHz. 

Product description and properties

The alarm remote control GETRONIC GT 82 TXC is especially distinguished by its alarm function. It is one of the most performant models available in the market and proposed by the brand GETRONIC. Innovative design and high performance, this transmitter operates under the frequency 433.92 MHz in a very secure manner, easy to handle and to use thanks to its two buttons. 

A remote control which programming is done with the receiver, the gadget has two buttons and is easily used by its reduced size. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your Getronic GT 82 TXC remote control.

 

Important information

NOTE : This remote control has a green LED.

 

ATTENTION : In order to do the programming of this remote control, you will need the programming manual of the global alarm system and the installed code.  

Note : Transmitters with different frequencies are not compatible.

 

What do you need to know about this remote control ?

The remote control’s operation

The alarm remote operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 12V, excellent voltage to optimize the good autonomy of the device. 

The programming is quick and simple because it’s done with the receiver.

 

GETRONIC GT 82 TXC remote control replaces and is compatible with the remote GETRONIC GT 82 N.

 

GT82 TXC remote control with 2 black buttons for alarm operators. This model is powered by an extended battery life 12V type 23A. 

A 2-channel fixed code hand transmitter type, can control up to two motorizations, each button allows to drive a motorized system. A sufficient range that promises the good functioning of the device !

The registration of the GT 82TXC transmitter only takes few minutes and the programming requires no special equipments. 

If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

 

Good to know

Besides offering big comfort to its users, an alarm remote control also offers absolute security. It’s difficult and impossible to command an automation without a remote control. 

Only the holders of the transmitter can unlock a motorized system. That’s why it’s very important to think to replace your remote at any deficiency or malfunction. To guarantee a perfect compatibility, we recommend you to choose the same model or a perfectly compatible model. 

Ergonomics

Getronic gt 82 txc remote control is so ergonomic, stylish and lightweight. Its reduced size makes it very simple to handle and perfect to any environment. The alarm transmitter is really resistant thanks to its tenacity and its impressive toughness even under strong pressure or shock.

This GETRONIC key fob only has two ergonomic grey buttons, making it elegant and simple to use!

 

How to program GETRONIC GT 82 TXC remote control ?

 

Important steps of the programming

Please note: If you keep the programming button of your receiver pressed down too long, you will erase the programming code of all your already programmed remotes.

Programming of your new remote control: 

  1. Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).

  2. The LED light on the receiver illuminates, press a button on your new remote control for 1 second.

  3. Let the button go, the LED on the receiver turns off immediately or in the following 10 seconds.

  4. Your new remote control is programmed.

 

Can’t seem to program your GETRONIC GT 82 TXC alarm remote control ? 

No need to panic, our team is here to help using our skills. First of all, consider looking through the programming instructions sent with each GT82 TXC remote control. our online store also provides tutorials for most GETRONIC remote controls. 

If you need any more help, call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos. 
 

 

Why order your GETRONIC GT 82 TXC remote control on Remote Control Express?

-Advantage 1:

Wishing to receive your remote control quickly? Choose 24-hour delivery anywhere in United Kingdom.

 

-Advantage 2:

Purchase multiple remotes and save money by taking advantage of our shipping offers.

 

-Advantage 3:

Wanting to save time and be able to use your GT 82TXC alarm remote control straight away? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your item.

 

Our website will lead you through each stage of the process of buying your GETRONIC GT 82 TXC remote control.

Important: In order to program the remote control, you will need the general alarm instruction manual and also the installer code.

Technical information GETRONIC

Brand GETRONIC
Model GT 82 TXC
Frequency 433.92 MHz Attention:: Remotes with the same frequency are not compatible, if the shape, the color of keys, color of the box is different. This applies even if they are from the same brand. They do not have the same electronics!
Number of buttons 2
Type of programming Programming with the receiver
Type of battery 12V(23A)
Dimensions 4 x 4 x 1 mm
Battery and instructions included Yes

How to program GETRONIC GT 82 TXC remote control ?

100% of our customers find it easy to program this remote

PDF - Manual

Download the manual

« Simple programming without additional material ! »

Read the reviews of our customers , withTrustpilot All of the following reviews are from customers who bought the product.
Deborah
Stoke on Trent, 05/08/2015

« Remote is great and was for what I assume is a discontinued line so programming was a little difficult and not like instructions on the site. Not fault of supplier of remote and in all honesty there was very little info available on the alarm fitted.Without Remote ccontrol express the car alarm would have been useless! Great service and without their site would never have been able to cross reference to new fob.. Highly recommended supplier! »