order 2 remotes
Reference : : TX4UNIS
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Battery and instructions included||Yes|
|This remote replaces||LIFTMASTER 4330E, CHAMBERLAIN 4330E, NESTOR 4330EML, MOTORLIFT 4330EML, CHAMBERLAIN 4330EML, GAROG 4332E, LIFTMASTER 4333E, CHAMBERLAIN 4333E, MOTORLIFT 4333EML, CHAMBERLAIN 4333EML, LIFTMASTER 4335E, CHAMBERLAIN 4335E, MOTORLIFT 4335EML, CHAMBERLAIN 4335EML, MOTORLIFT 84334EML, LIFTMASTER 94330E, LIFTMASTER 94334E, CHAMBERLAIN 94334E, CHAMBERLAIN 94335E, LIFTMASTER 94335E, HOMENTRY HE4331|
GAROG 4332E remote control available only in one colour which is black. This remote control is replaced by the new compatible model LIFTMASTER TX4UNIS (black remote with grey buttons). The GAROG with the reference 4332E is a 2 button remote for gates, using the frequency 433.92 MHz.
To improve your daily comfort when using your motorized gate, Garog 4332E remote control is the best option. By having this type of transmitter, you will reduce your efforts everytime you want to use your gate.
The original GAROG remote control will allow you to control your motorized gate remotely in a very simple way !
This transmitter is programmed with the receiver. It has 2 white buttons and is easily used by its special shape.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your 4332E gate remote control.
ATTENTION: Please do not confuse this remote control (white buttons) with the model GAROG 84333E (grey buttons). As they are not compatible.
Note: This transmitter exists in three buttons, it’s the LIFTMASTER 4333E model.
The remote control’s operation
A high quality original Garog 4332E remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 3V.
The programming is done with the receiver. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
Garog 433 2E remote control replaces the following Garog gate remotes:
It is compatible with the following Garog gate remotes:
This transmitter is compatible with all LIFTMASTER radio receivers using the frequency 433.92 MHz.
The remote control is suitable for all LIFTMASTER gate automation systems and allows all automatic gates or garage doors operating on the 433MHz frequency.
As for its programming, the device can be programmed with the receiver and from an existing remote or from the receiver.
GAROG 4332E a 2 channel remote control with an innovated design, it is powered by a 2 batteries type CR2025. Has a satisfying range !
Easy programming with the receiver that only takes few minutes. No special equipments are required.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
Garog 4332E remote control is a small device with a special rectangular shape. Its small and reduced size makes it very simple to handle and easy to use. It is very ergonomic and has two white buttons in black casing. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
Note: Each new remote has its own code. You must register the code of your new remote in the receiver in order to work.
Remarks : -This description will not correspond to every brand and model. You should always consult the information provided on installation of the product.
-Holding down the programmation button for more than 5 seconds will erase all the already programmed remotes with the receiver !
Programming of your new remote control:
Open the casing of your receiver located at the end of the wire from the antenna. Press the programming button on the receiver (MEMO, ENR, PROG, REC...etc).
Note: On certain receivers, you only have to press the button and release it. On others, you have to hold down the button.
A light on the receiver will light up or flash. Hold down the button on your new remote control for one second.
Release the button : the light will on the receiver will go out immediately or within 10 seconds.
Verify that your new remote is working. Then close the casing of the receiver.
Finding it hard to program your GAROG 4332E gate remote control ?
No need to panic, we are available to assist using our skills. First of all, consider looking through the information sent with each 4332E remote control. our online store also provides tutorials for most GAROG remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
Why order your GAROG 4332E remote control on our online store?
-Advantage 1 :
Wishing to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere on United Kingdom soil.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Hoping to save time and be able to use your GAROG 4332E gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your GAROG 4332E remote control.
Our online store will lead you through each stage of the process of buying your GAROG 4332E remote control.