Reference : : PHOX2-433 - CONTR. 17
The advantages of Remote Control-Express:
|Model||PHOX2-433 - CONTR. 17|
|Number of buttons||2|
|Type of battery||CR2032|
|Dimensions||6 x 3.5 x 1 cm|
|Battery and instructions included||Yes|
V2 PHOX2-433-433 CONTR. 17 available only in black with black buttons. The V2 with the reference PHOX2-433 CONTR. 17 is a remote for gates with 2 black buttons and a grey button border, it operates under the frequency 433.92 MHz.
V2 PHOX2 CONTR. 17 remote control allows you the privilege to control all your motorizations. This gadget aims to provide daily comfort because it allows the easy control of your motorized gate and all your automation. This model is characterized by its modern and sober design. Its black casing and two buttons allow the transmitter to an elegant aesthetic.
V2 PHOX2 C.17 uses the frequency 433.92 MHz is a rolling code remote control which programming is done in the receiver or from an already-programmed remote.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your V2 PHOX 2 CONTR. 17 gate opener.
WARNING: These remotes come with an already programmed CONTRACT CODE 2 (CONTR.V2 or CONTR.2), which can be found on the label behind the transmitter.
ATTENTION: If you need a replacement to V2 remote control, check that is written “CONTR. 17” rear the remote control.
NOTE: The copious WHY2 remote control is able to copy two codes V2, regardless of the distributor code.
V2 transmitters have a distributor code.
Note: The distributor code is printed on the back of the remote control on a label.
This code is provided in the form C. n° or CONTR. n°.
Attention: V2 remotes all have the same appearance but they are not compatible with each others depending on the distributor code.
The remote control’s operation
V2 PHOX2-433-CONTR. 17 garage door remote control is compatible with V2 Elettronica WALLY 2 radio receiver. This transmitter operates with a frequency of 433.92 MHz to emit signals to the receiver.
The copious V2 PHOX 2 remote control is configured from a V2 PHOX 2 remote in working condition.
The programming is done on self-learning. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
V2 PHOX2-433 C. 17 remote control replaces the following V2 gate remotes:
This remote control replaces all PHOENIX remote controls of the same brand V2.
It is compatible with the following V2 gate remotes:
V2 HANDY 4 CONTRA. 47
Compatible with all CONTRATS V2 models ( CONTR.002 - CONTR.017 - CONTR.47...)
V2 PHOX2 CONTR.17 gate key fob is equipped with two buttons and are the best solution option for residential and commercial automation systems. It has a significant frequency of 433.92 MHz that allows the transmitter to a very long range.
As for its programming, the device has an auto-programming function with a rolling-code and operates on self-learning mode. It is easily programmed from an existing remote or from the receiver.
The gadget is delivered with instruction so don’t panic!
V2 PHOX2-433 C.17 remote control with 10 mA max absorption, it is powered by a 3V lithium battery type CR2032. A distance up to 300 meters in open field that can be increased to 350 meters by setting up an antenna for gates! It operates on temperatures from -10 °C to +60 °C.
Easy transmission of the coding (rolling code type) and easy programming with the receiver. A 2 channel remote control that allows 2 automatic gates and garage doors.
Good to know
As mentioned above, V2 PHOX2 CONTR.17 is an auto-programming remote control. It can copy the code of your original already-programmed transmitter. It is necessary for your old remote control to be in an excellent state of operation in order to succeed in the programming.
If you no longer have an old remote control or if this one is no longer functioning you will, in this case, do the programming of your PHOX2 C.17 directly in the receiver board.
V2 PHOX2-433 C. 17 remote control is only 63,2 mm long, a width of 32,4 mm and a thickness of 9,8 mm. If you are looking for a good design remote control and easy to use, choose right away the phox2. This model is highly aesthetical, its colour and two ergonomic buttons give it a classic aspect. It is also a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. Enabling the device to a long life.
The gadget is very simple to handle and easy to use thanks to its small and reduced size.
NOTE: If you keep the programming button of your receiver pressed down too long, you risk erase the programming code of all your already-programmed remotes.
Programming of your new remote control :
Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).
The LED on the receiver illuminates or blinks. Press a button on your new remote control for 1 second.
Let the button go, the LED light on the receiver goes out immediately or in the following 10 seconds.
Your new remote control is programmed.
Finding it hard to program your V2 PHOX2-433 - CONTR. 17 gate remote control ?
No need to worry, we are available to help using our know-how. First of all, consider reading the programming instructions sent with each PHOX2-433 - CONTR. 17 remote control. our online store also provides tutorials for most V2 remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
V2 is a leading group active in the home and building automation.
It is headquartered in Italy, at Racconigi, where its mother company, V2 S.p.A., established since 1985.
V2 Group operates from six subsidiaries in France, Spain, Portugal, Morocco, Tunisia and China by proudly serving a network of distributors and vendors located in more than 40 countries (as of 2015).
V2 is in continuous expansion, which declines the concept of technological innovation in all its forms, from the automated systems for gates to those for garages and windows, up to the safety devices.
Our solutions, perfect for both residential and industrial use, combine technology, innovation, research, to make daily movements simpler and safer.
V2 automations for residential and industrial applications include automation system for gates, garage doors, rolling shutters and awnings.
In order to add value to the life of the people who use our products and the work of the professionals who choose them every day, we continue to innovate and look for new challenges. We believe in the change and in the ability to create a safer world.
Why buy your V2 PHOX2-433 - CONTR. 17 remote control on our online store?
- Advantage 1 :
Wanting to receive your gate remote control quickly? Choose 24-hour delivery anywhere on United Kingdom soil.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Hoping to save time and be able to use your V2 PHOX2-433 - CONTR. 17 gate remote control straight away? You’ll be glad to learn that all our remote controls come with batteries. This means you can quickly start using your V2 PHOX2-433 - CONTR. 17 remote control.
Remote Control Express will lead you through each stage of the process of buying your V2 PHOX2-433 - CONTR. 17 remote control.