SEAV BE-HAPPY-S2 BLUE
Reference : :
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||10 Switch|
|Type of battery||CR2032|
|Battery and instructions included||Yes|
|This remote replaces||CARDALE AZAT 0001, CARDALE AZAT 0002, SEAV BE-HAPPY-S1, SEAV BE-HAPPY-S1 BLUE, SEAV BE-HAPPY-S2 BLUE, SEAV BE-HAPPY-S3 BLUE, SEAV TXS1, SEAV TXS2, SEAV TXS3|
SEAV BE-HAPPY-S2 BLUE remote control available only in one colour which is blue (translucent). This remote control is replaced by the new model SEAV BE-HAPPY-S2 and is fully compatible with the new SEAV BE-HAPPY-S3 Blue which is a 3 button model. The SEAV with the reference BE-HAPPY-S2 BLUE is a 2 button remote for gates, using the frequency 433.92 MHz.
You have chosen to invest in a gate operator from the prestigious SEAV brand but your remote control is no longer functioning, it is time to replace it with a new compatible model. A remote control which programming is done in the receiver, the BE-HAPPY-S2 BLUE gate opener has two buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your BE-HAPPY-S2 BLUE gate remote control.
WARNING: open your remote SEAV Be-Happy-S2 Blue and look inside for a bank of small switches.
Please check the reference of your original SEAV remote. There are two models of the Be-Happy remote, one with and one without switches (internal mini switches used for programming the remote).
The Be-Happy-S2 blue (the one displayed here) is the one with switches, switch programming (fixed code).
The model without switches is the SEAV Be Happy RS2 blue (rolling code). You need to buy the right model to be able to program your remote, Be-Happy-S2 blue and Be-Happy-RS2 blue are not compatible.
A high-quality original SEAV BE-HAPPY-S2 Blue remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 3V.
The programming is done by coding with 10 Switches. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive.
Seav BE-HAPPY-S2 blue remote control replaces the following Seav gate remotes:
It is compatible with the following Seav gate remotes:
We supply a radio receiver compatible with all BE HAPPY versions like the one displayed here: SEAV RECEPT RES 2224.
Note: This transmitter exists in three buttons, it’s the BE HAPPY S3 BLUE model.
SEAV BE-HAPPY-S2 blue gate key fob is equipped with two buttons that control all the movements of your garage door according to your specifications. The frequency of this item is 433.92 MHz.
The remote control is suitable for all SEAV gate automation systems and allows all automatic gates or garage doors operating on the 433MHz frequency.
As for its programming, the device has a Switch programming.
BE HAPPY S2 Blue a 2 channel remote control with an innovated design, it is powered by a 3V battery type CR2032. A range up to 100 meters outside and 35 meters inside!
Easy transmission of the coding (fixed code type) and easy programming (10 switches).
The BE HAPPY-S2 Blue operates at temperatures of -20°C +55°C.
To program these transmitters with an existing transmitter simply press the small recess on the transmitter with a flat-head screwdriver and twist the screwdriver to remove the top cover. You will see a row of 10 small dip switches at the base, which will be up or down, set the new dip switches in the same positions as the existing transmitter and replace the covers.
The radio receiver may be located in different places depending on the configuration of your system. Sometimes it’s built-in your automatism board.
Seav Be-Happy-S2 blue remote control is only 65 mm long, a width of 33 mm and a thickness of 16 mm. It is very lightweight and weighs only 20g. It is very simple to handle and easy to use thanks to its small size. It has two blue buttons in the blue translucent casing. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
Remote that contains a row of mini switches:
Open the casing of your old remote control or a remote that works on your gate or your garage door.
Open the casing of your new remote control, ensure that the switches on your new remote are in the same positions as on the old transmitter.
You can do this by using any object with a fine point, for example, a screwdriver. Then, close the remotes.
Your new remote control is programmed.
Note: - Some remotes gave one or two extra switches, separated from the main row. These switches should also be in the same position as on the old remote.
No need to worry, our team is here to assist using our know-how. Firstly, consider reading the information sent with each BE-HAPPY-S2 BLUE remote control. Remote Control Express also provides instructional videos for most SEAV remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step to help you program your gate remote control.
You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.
If you don’t have any old remote control, all you need is to open the case of your receiver, as it also contains the same switches, where you find the dip-switches and do the programming. Just reproduce the combination by putting the switches in the same position as the ones in the receiver on your new remote control.
SEAV is an Italian brand, created in 1983. The brand manufacturers high-quality automation systems for garage doors, industrial doors, electric gates and garage door operators.
The company is committed to ensuring that its manufacturing processes are strictly adhered to in order to offer the best products to its clients. By choosing the brand SEAV you opt to 30 years of expertise in the automatism field.
The most famous SEAV remote controls are SEAV BE-HAPPY-S2, BE-HAPPY-S3, BE-HAPPY-RS2, LRX 2217 M, BE-EASY and the range of transmitters SEAV BE-SMART.
SEAV guarantee 100% original remotes with a warranty of 2 years.
Why buy your SEAV BE-HAPPY-S2 BLUE remote control on Remote Control Express?
- Advantage 1 :
Wishing to receive your gate remote control fast? Choose 24-hour delivery anywhere in the United Kingdom.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Wanting to save time and be able to use your SEAV BE-HAPPY-S2 BLUE gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. As a result, you can quickly start using your SEAV BE-HAPPY-S2 BLUE remote control.
Remote Control Express will lead you through each stage of the process of buying your SEAV BE-HAPPY-S2 BLUE remote control.