order 2 remotes
Reference : : E80/TX52R
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||12V(23A)|
|Dimensions||7 x 4 x 2 cm|
|Battery and instructions included||Yes|
ROGER TX52R remote control only available in one colour which is grey with black edges. This remote control is replaced by the new compatible model TX54R with 4 buttons. The ROGER with the reference TX52 R is a 2 button remote for gates, operating under the frequency 433.92 MHz.
To improve your daily comfort when using your motorized gate, ROGER TX52R remote control is the best option. By investing on this type of transmitter, you are choosing a convenient and reliable gadget.
A fixed-code remote control which programming is done with the receiver, the gate opener has two buttons and is easily used by its square shape.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your ROGER TX 52R gate remote control.
NOTE: Integrated copy function. Allows the copy function through the frontal alignment of the two radio controls.
WARNING: Do not confuse this remote with the blue Roger E80-TX52R/RC. They are not compatible.
Please note: This keyfob has an average absorption of 12 mA and a modulation AM/ASK.
ATTENTION: The gate controller can copy other fixed code transmitters and it operates on temperatures from -10°C to +55°C.
Exists in 4-button version it’s the model TX54R.
Remote controls using different frequencies are not compatible.
The remote control’s operation
The gate opener operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 3V, excellent voltage to optimize the good autonomy of the device.
The programming is quick and simple because it’s done with the receiver.
ROGER TX52R remote control replaces the following ROGER gate remotes:
Replace all the old model ROGER remotes.
It is compatible with the following ROGER gate remotes:
TX52R remote control with 2 black buttons for garage door operators. This model is powered by an extended lithium battery life 3V type CR2032.
A 2-channel fixed code hand transmitter type with 65536 combinations, can control up to two motorizations, gate, garage door...etc, each button allows to drive a motorized system. A sufficient range of 150 meters that promises the good functioning of the device !
The registration of the TX 52R transmitter only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control.
At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
Roger tx52r remote control is only 67,9 mm long, a width of 37,4 mm and a thickness of 11,2 mm. It is so ergonomic, stylish and lightweight. Its reduced size makes it very simple to handle and perfect to any environment. The gate opener is really resistant thanks to its tenacity and its impressive toughness even under strong pressure or shock.
This ROGER key fob only has two ergonomic grey buttons, making it elegant and simple to use!
Please note: If you keep the programming button of your receiver pressed down too long, you will erase the programming code of all your already programmed remotes.
Programming of your new remote control:
Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).
The LED light on the receiver illuminates, press a button on your new remote control for 1 second.
Let the button go, the LED on the receiver turns off immediately or in the following 10 seconds.
Your new remote control is programmed.
Can’t seem to program your ROGER TX52R gate remote control ?
No need to panic, our team is here to help using our skills. First of all, consider looking through the programming instructions sent with each TX52R remote control. our online store also provides tutorials for most ROGER remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
You can copy this transmitter. Given that the remote control is a fixed code type, it can be copied on all fixed code remotes.
You've got a gate that's the envy of your neighbourhood, now get the gate automation system to match. The new Roger Technology brushless gate operators are the best on the market. Roger’s brushless technology represents a revolution in the automation sector and its Italian design and manufacture guarantees quality and style. Why brushless? It’s powerful, reliable and it has low energy consumption. A brushless motor won’t burn out, can consistently operate under super intensive use even in extreme environments - all on a low voltage system. It’s unique digital controller is designed for rapid gate movement without compromising safety or control.
All remote controls for ROGER garage doors or gates are available at remotecontrol-express. Our goal: to help you replace your Roger garage remote control or to find and buy a new ROGER remote.
Why order your ROGER TX52R remote control on our online store?
-Advantage 1 :
Wishing to take delivery of fast? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your ROGER TX52R gate remote control straight away? You’ll be glad to learn that all our remote controls come with batteries. This means you can quickly start using your ROGER TX52R remote control.
Our website will lead you through each stage of the process of buying your ROGER TX52R remote control.