order 2 remotes
Reference : : FLO2
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||10 Switch|
|Type of battery||12V(23A)|
|Dimensions||41.7 x 7.7 x 2.3 cm|
|Battery and instructions included||Yes|
NICE FLO2 (SWITCH) is a gate remote control available only in one colour which is black. This remote control can be ordered as a replacement for the 1-button remote NICE FLO1 and is fully compatible with the new 4-button model NICE FLO4. The NICE with the reference FLO 2 is a Fixed Code remote for gates, it has 2 blue buttons and operates under the frequency 433.92 MHz.
The NICE FLO2 (SWITCHES) remote control gives you the opportunity to manage your engines efficiently and easily. By using this gate opener, it will be easy to open and close your automatic gate or motorized garage door. This model stands out for its elegant design, its black shell and its rounded lines that offer a sober and original aestheticism.
Moreover, its blue buttons enhance its elegance.
As for its programming, the operation is very easy. This transmitter is programmed by positioning Switches.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your NICE FLO2 gate remote control.
ATTENTION: This remote control is available in Rolling Code version with mini coding switches, which is not compatible.
WARNING: Do not confuse this model with NICE FLO2R-S. These 2 models are similar in appearance but are not compatible. To find out the model of your remote control, you have to open its case.
If it has a row of mini internal programmable switches, it is NICE FLO2. If you do not see any switches, your beep is a NICE FLO2R-S.
Note : This model is available in a 4-button version which is the NICE FLO4 (SWICTHS).
Can be used as a keyfob, fixed to the wall or fixed to your car dashboard.
The remote control’s operation
2 channel transmitter with 10 internal dipswitches and multiple memorizations. A new stylish design 433.92 MHz fixed code system and easy programming procedure from the receiver.
Nice Flo 2 (switches) handheld transmitter is compatible with the radio receivers working with frequency 433.92 MHz: NICE FLOXM220.
NICE FLO2 remote control replaces the following NICE gate remotes:
It is compatible with the following NICE gate remotes:
NICE FLO1 (SWITCHES)
NICE FLO4 (SWITCHES)
The 2-button remote control has a system of high security fixed with internal switches.
NICE FLO2 switch 2-channel rolling code key fob with a small size, it is powered by a long battery life, 12V type L1028 or 23A. A distance up to 150-200 meters. It has a 10 internal encoding switches that guarantee an easy programming procedure to the transmitter.
Easy and user-friendly programming of receivers and transmitters only takes a few minutes with the receiver.
Very practical and useful in multi-user systems.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
A gate remote control is an essential accessory that controls your motorized gate.
To choose the good device, there are some of the criteria which must be considered.
First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipment, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
NICE FLO2 remote control is only 72 mm long, a width of 40 mm and a thickness of 15 mm. Its reduced size and light-weight make it very easy to use. Indeed, in addition to its rectangular shape and rounded lines, this model benefits from a compact and minimalist size. Its well-designed dimensions make it easy to handle. This transmitter finds a place in your bag or pocket without any worries.
The handheld transmitter is elegant and convenient, can be used as a keyring or keyfob, fixed to the wall or your car’s dashboard with the support included in the pack. It is also a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.
Programming of your new remote control:
There are two ways for programming your new remote control
Open the casing of your already-programmed transmitter.
You will see a row of mini programmable numbered switches that are in the ON or OFF position.
Open the casing of your new remote, you will see a row of mini numbered switches.
Set them in the same way as those in your already-programmed remote.
Your new remote control is programmed.
2- Receiver-based programming:
Open the casing of your receiver, located next to your motorization. On the receiver circuit board, you will see a row of small programmable switches that are in the ON or OFF position.
Open the casing of your new remote. You will see a row of mini programmable numbered switches.
Set them in the same position as the receiver.
Your new transmitter is programmed.
Remarks: - Please note: some remote controls contain one or two pair of supplementary programmable switches which are separate from the main row. Theses switches must also be set in the same position as those found in the remote control already programmed.
If this method does not work, retry by reversing the positions on the small switches with regard to the receiver or to your already-programmed remote control.
Finding it hard to program your NICE FLO2 gate remote?
No need to panic, we are available at your service to assist using our expertise. Firstly, consider looking through the information delivered with each NICE FLO2 product. Our online store also provides tutorials for most NICE remote controls. If you need any more details or help, call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
If you live in a co-op of more than 50 users, it is not possible to program a new remote, the radio receiver is intentionally locked by the system installer. Please check with your installer or your syndic for details if the system is locked or no.
If you live in an individual house, no need to worry, the installation is not locked and the programming is very easy.
No! Even if these 2 beeps look very similar on the surface, NICE FLO2 and NICE FLO2R-S are not compatible because they do not have the same type of encoding.
Indeed, these 2 models are similar. Recognizing the right model based on its design is not possible. You have to open it.
Open the remote control box, if you see rows of microswitches, it means that the model is a NICE FLO 2. Otherwise, if you do not see any switches, it is the FLO2R-S model.
This model is only compatible with the beeps of the same brand.
If you have not succeeded in programming your NICE FLO2, try the steps again by reversing the position of the mini switches relative to the receiver or remote control already programmed.
If this does not work yet, do not hesitate to consult a professional in this area.
Nice belongs to the group S.p.A. created in 1990; it’s an Italian company listed on the Milan stock exchange. The subsidiary is founded in France in 1995 and is based at Aubagne in the department Bouches-du-Rhônes. It has 111 employees at the headquarters. The company achieved a turnover of about 200 million in the hundreds of countries where it markets its automation. Nice is characterized in the domotic market by its innovative design, not to mention the clean technologies of its series of automatisms that operate with solar energy. Moreover, Nice manufactures easy-to-use products in order to satisfy its clients. Nice is deeply committed in its programme FEEL to help persons with disabilities. Nice is specialized in the motorization of gates and portals, roller shutters and blinds.
Why command your NICE FLO2 (SWITCHES) remote control on our online store?
- Advantage 1 :
Wanting to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere in the United Kingdom soil.
- Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
- Advantage 3 :
Hoping to save time and be able to use your Nice Flo2 gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. This means that the user can quickly start using his item.
Our online store will lead you through each stage of the process of buying your NICE Flo2 remote control.