order 2 remotes
Reference : : 437681
The advantages of Remote Control-Express:
|Number of buttons||2|
|Type of programming||Programming with the receiver|
|Type of battery||CR2025|
|Dimensions||64 x 15 x 25 mm|
|Battery and instructions included||Yes|
ECOSTAR RSC2 433 remote control only available in one colour which is black. This remote control is 100% compatible with the ECOSTAR RSE2 that is cheaper. The Ecostar with the reference RSC2 is a 2 button remote for gates, using the frequency 433.92 MHz.
Have you chosen to invest in a gate operator from the prestigious ECOSTAR brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A remote control which programming is done in the receiver, the Ecostar RSC2 gate opener has two buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your ECOSTAR RSC 2 gate remote control.
This remote control is fully compatible with the cheaper model ECOSTAR RSE2.
ECOSTAR RSC2 transmitter is easily programmed (with the receiver). It operates under the frequency 433.92 MHz, perfectly compatible with Ecostar RET2 receiver. Transmitters with different frequencies are not compatible.
CAUTION: The ECOSTAR RET2 receiver compatible with this remote, accepts programming of up to 6 RSC2 remote controls. By the register of a 7th remote control, this will delete the first RSC2 hand transmitter you registered.
The remote control’s operation
ECOSTAR RET2 receiver is ideal for this gate remote control. The programming is quite simple because it’s done with the receiver.
ECOSTAR RSC 2 remote control replaces the following Ecostar gate remotes:
HÖRMANN RS4-433 Mhz
It is compatible with the following Ecostar gate remotes:
WARNING: Ecostar remote controls are not compatible with other Hörmann remotes or operators, and they are not compatible either with other 433 MHz remotes or operators. ECOSTAR fobs only work at Hörmann Ecostar gate operators: Lifttronic, Portronic, and Doortronic.
RSC2 2-button remote control for garage door operators: LIMUS ONE, LIFTRONIC and ECOSTAR. ECOSTAR RSC2, is compatible with these motorizations: BERNER LIMUS and ECOSTAR. This model is powered by an extended battery life CR2025. A 2-channel Rolling code hand transmitter type. A distance up to 100 meters, well-functioning !
The registration of the RSC2 transmitter only takes few minutes and requires no special equipments. If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. You can also get a telephone support in order to simplify the programming of your control device.
Good to know
A gate remote control is an essential accessory that controls your motorized gate. To choose the good device, there are some of the criteria which must be considered. First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.
Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote.
ECOSTAR RSC 2 remote control is only 64 mm long, a width of 25 mm and a thickness of 15 mm. Its small and reduced size makes it very simple to handle and easy to use. The gate remote is really resistant thanks to its tenacity and its impressive toughness even under strong pressure or shock.
This Ecostar key fob only has two black ergonomic buttons, making it simple to use!
There are 4 main steps to program your remote:
Press the transparent button under the ECOSTAR engine, release it when a LED begins to flash slowly.
During the following 10 seconds, press a button on your new remote control. You can release the button when the LED begins to flash faster.
Press the same button on your Ecostar RSC2. Keep it pressed till the LED begins to flash rapidly, then you can release it.
Your new remote is now programmed.
Finding it hard to program your ECOSTAR RSC2 gate remote control ?
No need to worry, our team is here to assist using our expertise.
Firstly, consider looking through the notice sent with each RSC2 remote control. Our online store also provides tutorials for most ECOSTAR remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
ECOSTAR is a trademark of the german HÖRMANN group, which is designed for sales in hardware stores.
Equipments from this brand are of high-quality. This label offers a wide range of remote controls in its catalogue, but the most common model of remote controls is the ECOSTAR RSE2, very easy to program, which is replaced by the RSC2 remote.
In order to choose your ECOSTAR remote control among this huge choice, you must firstly know the reference of your receiver to ensure that it is compatible with your gate transmitter.
ECOSTAR remote control is noted for its high performance !
Why buy your ECOSTAR RSC2 remote control on our online store?
-Advantage 1 :
Wishing to take delivery of fast? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your ECOSTAR RSC2 gate remote control right now? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your ECOSTAR RSC2 remote control.
Remote Control Express will lead you through each stage of the process of buying your ECOSTAR RSC2 remote control.