order 2 remotes
Reference : : KIT FRED MYO2 - 2 MYO 4C
The advantages of Remote Control-Express:
|Reference :||B 440.504-S|
|Number of buttons||4|
|Type of programming||Programming with the receiver|
|Type of battery||CR2032|
|Dimensions||7 x 4 x 1 mm|
|Battery and instructions included||Yes|
BERNAL PICO-868-3 remote control available only in one colour which is black with white buttons. This remote control is replaced by the new compatible model KING-GATES KIT FRED MYO2 - 2 MYO 4C. The BERNAL with the reference PICO-868-3 is a 4-button remote control gate opener, using the frequency 868.5 MHz.
Have you chosen to invest in a gate operator from the prestigious BERNAL brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A Rolling code remote control which programming is done with the receiver, the Bernal PICO-868-3 transmitter has four buttons and is easily used by its ergonomics.
For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your PICO-868-3
gate remote control.
ATTENTION: Do not confuse this transmitter with the model King-Gates STYLO without the inscription BERNAL that uses the frequency 433.92 MHz.
Warning: The PICO-868-3 remote control is programmed from the receiver and is ideal for the use of automated systems equipped with a radio receiver 868.5 MHz. Do not operate with receivers using different frequencies.
NOTE: Transmitters using different frequencies are not compatible.
The remote control’s operation
Type de codage : Enregistrement dans le récepteur
BERNAL PICO-868-3 a 4-channel remote control using the frequency 868.5 Mhz. This handheld transmitter is compatible with receivers working with frequency 868.5 Mhz.
The programming is quick and simple because it’s done with the receiver.
BERNAL remote control replaces and is compatible the following Bernal gate remotes:
PICO 868 2
PICO 868 4
PICO-868-3 a 4-channel rolling code keyfob that controls all the movements of your gate and garage door...etc. according to your specifications. The frequency of this item is 868.5 Mhz.
As for its programming, you have to do it in the receiver.
Bernal PICO 868 3 remote control with 4 white buttons for garage door operators.This model has a rolling code type of encoding and is powered by a battery type CR2032. A hand transmitter with a high range up to 100m !
The registration of the Pico-868-3 only takes few minutes and the programming requires no special equipments.
If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control.
Good to know
Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate.
It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver.
To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products.
Bernal pico 868-3 remote control is 70 mm long, a width of 37 mm and a thickness of 10 mm. If you are looking for a practical remote control with a good design and functionality choose right away the pico-868-3. This transmitter is highly aesthetical, its shape and reduced size make it very easy to handle. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Very elegant keyfob thanks to its black casing and 4 white buttons !
Please note: If you keep the programming button of your receiver pressed down too long, you will erase the programming code of all your already programmed remote controls.
Programming of your new remote control:
Open the casing of your receiver located next to your motor. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC…).
When the LED light on the receiver illuminates, press a button on your new remote control for 1 second.
Let the button go. The LED on the receiver turns off immediately or in the following 10 seconds.
Your new remote control is programmed.
Can’t seem to program your BERNAL PICO-868-3 gate remote control ?
No need to panic, we are available to help using our expertise. Firstly, consider reading the information delivered with each PICO-868-3 remote control. our online store also provides instructional videos for most BERNAL remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos.
Why buy your BERNAL PICO-868-3 remote control on our online store?
-Advantage 1 :
Wanting to take delivery of as soon as possible? Choose 24-hour delivery anywhere in United Kingdom.
-Advantage 2 :
Purchase multiple remote controls and save money by taking advantage of our shipping offers.
-Advantage 3 :
Wanting to save time and be able to use your BERNAL PICO-868-3 gate remote control straight away? You’ll be glad to learn that all our remote controls come with batteries. As a result you can quickly start using your BERNAL PICO-868-3 remote control.
Remote Control Express will lead you through each stage of the process of buying your BERNAL PICO-868-3 remote control.