Remote DITEC BIXLP2

100% compatible

Remote DITEC BIXLP2

DITEC BIXLP2

compatible with

Remote ENTREMATIC ZEN2

ENTREMATIC ZEN2

Your remote DITEC BIXLP2


remote control compatible with
ENTREMATIC ZEN2

Reference : :

All information concerning your remote control DITEC BIXLP2 :
 Free postage order 2 remotes
14 days to change your mind
Free advice when buying and programming
Secure payment

Secure payment

Brand DITEC
Model BIXLP2
Frequency 433.92 MHz
Number of buttons 2
Type of programming Programming with the receiver
Type of battery 12V(23A)
Dimensions 4 x 1 x 4 cm
Battery and instructions included Yes
This remote replaces DITEC BIXLP2, DITEC BIXLP2 RED, DITEC BIXLS2, ENTREMATIC ZEN2B

DITEC BIXLP2 remote control only available in two colours red and green. This remote control is replaced by the ENTREMATIC ZEN4 which is 100% compatible. The Ditec with the reference BIXLP2 is a 2 button remote for gates, operating under the frequency 433.92 MHz. 

Product description and properties

To improve your daily comfort when using your motorized gate, DITEC BIXLP2 remote control is the best option. By investing on this type of transmitter, you are choosing a convenient and reliable gadget.

A remote control which programming is done with the receiver, the gate opener has two buttons and is easily used by its small size. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your BIXLP2 gate remote control.

 

Important information

Caution : For compatibility reasons, you have to choose the exact same reference as your original remote control.

 

Attention : The model BIXLP2 is replaced by a new recent model. Note that the remote exists in red casing version, it’s the transmitter Ditec BIXLP 2 Red.

NOTE : Ditec bixlp 2 transmitter is easily programmed (with the receiver). It operates under the frequency 433.92 MHz, perfectly compatible with DITEC BIXLR22_CONT1 receiver. Transmitters with different frequencies are not compatible.

 

What do you need to know about this remote control ?

The remote control’s operation

Ditec Bixlp2 a 2-channel remote control using the frequency 433.92 Mhz. This handheld transmitter is compatible with the radio receiver DITEC BIXLR22_CONT1.

The programming is quick and simple because it’s done with the receiver.

DITEC BIXLP2 remote control replaces and is compatible with the following Ditec gate remotes:

 

BIXLP2 remote control with 2 grey buttons for garage door operators. This model is powered by a 12V extended battery life type LR23A. A 2-channel hand transmitter with a distance up to 100 meters, well-functioning !

The registration of the BIX LP2 transmitter only takes few minutes and the programming requires no special equipments. If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

Good to know

A gate remote control is an essential accessory that controls your motorized gate. To choose the good device, there are some of the criteria which must be considered. 

First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.

Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. 

At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote. 

Ergonomics

Ditec bixlp2 remote control is only 47 mm long, a width of 41 mm and a thickness of 14 mm. It is so ergonomic and designed to last. Its small and reduced size makes it very simple to handle and easy to use. The gate remote is really resistant thanks to its tenacity and its impressive toughness even under strong pressure or shock.

This Ditec key fob only has two ergonomic buttons, making it simple to use!.

 

 

How to program DITEC BIXLP2 remote control ?

 

Important steps of the programming

Note : Each new remote has its own code, in order for your new remote to work, you must register its code in the radio receiver.

 

Attention : This description will not correspond to every brand and model, please consult the original information provided on installation of the remote.

Holding down the programming button for more than 5 seconds could erase all the already programmed remotes ! 

  1. Open the casing of the receiver located at the end of the wire from the antenna.

  2. Press the programming button on receiver (ENR, MEMO, PROG, REC…). 

Note: On certain receivers, you only have to depress the programming button once and then release it. On others, you have to hold it down.

  1. A light will light up on the receiver. Hold down the button on your new remote for one seconds.

  2. Release the button, the light on the receiver will go out immediately or within 10 seconds. Verify that your new remote is working.

  3. Close the casing of the receiver.

 

Can’t seem to program your DITEC BIXLP2 gate remote control ? 

Fear not, we are available to assist using our expertise. First of all, consider reading the notice delivered with each BIXLP2 remote control. our website also provides instructional videos for most DITEC remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos. 
 

About the brand DITEC

Ditec is a long-term established brand in the field of gate automation and automatic pedestrian doors and amongst the leaders in terms of innovation and quality.

The brand belongs to Entrematic since 2010.

Entrematic is a multinational company, world leader in the distribution of Entrance Automation systems and products.

The offering includes prestigious product brands such as Ditec, Normstahl, Dynaco, EM, Amarr, Kelly, and its products are perfect for a number of applications ranging from residential to commercial to industrial.

Entrematic has a clear ambition: to be the best business partner for professionals companies distributing Entrance Automation products and establish long term partnerships with them.

The complete product catalogue, the efficient Logistics, the dedicated technical assistance, both pre- and after-sales make Entrematic an ideal partner for its clients.

To be more effective, Entrematic markets its offer through Teams of Specialists which offer the best know-how and support on different product lines and brands.


 

Why order your DITEC BIXLP2 remote control on our website? 

-Advantage 1 : 

Hoping to take delivery of fast? Choose 24-hour delivery anywhere on United Kingdom soil.

 

-Advantage 2 : 

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

 

-Advantage 3 : 

Hoping to save time and be able to use your DITEC BIXLP2 gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. This means you can quickly start using your DITEC BIXLP2 remote control.
 

Remote Control Express will lead you through each stage of the process of buying your DITEC BIXLP2 remote control.