Remote APRIMATIC TM4

APRIMATIC TM4 remote control available only in one colour which is red with black buttons. This remote control is a replacement to the old model APRIMATIC TR4. The APRIMATIC with the reference TM4 is a 4 button remote control gate opener, using the frequency 433.92 MHz. 

Product description and properties

Have you chosen to invest in a gate operator from the prestigious APRIMATIC brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A remote control which programming is done in the receiver, the Aprimatic TM4 transmitter has four buttons and is easily used by its ergonomics and its small size. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your APRIMATIC TM4 gate remote control.

Important information

ATTENTION: This transmitter is impossible to configure in collective installation or in co-op.

Note: For even more security, the coding is done with a Rolling code system. 

WARNING: Aprimatic TM4 remote control (works with unico system) is not compatible with TX2M and TX4M models (which work with apricode system).

NOTE: The remote control is supplied with a micro-USB connector for advanced programming and is compatible with Aprimatic software

In order to choose the correct model of transmitter, you have to check out the frequency of your item. Transmitters with different frequencies are not compatible. 

What do you need to know about this remote control ?

The remote control’s operation

APRIMATIC TM4 remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 12V, excellent voltage to optimize the good autonomy of the device. 

It has an auto-programming system so the operation is quick and simple because it’s done with the receiver.

Aprimatic tm4 remote control replaces the following Aprimatic gate remotes:

• Aprimatic TR2

• Aprimatic TR4

It is compatible with the following Aprimatic gate remotes: 

TM4 remote control works with other Aprimatic remotes in UNICO system:

• TR2 orange 

• TR4 orange 

• TR2 black 

• TR4 black 

• TM4 

Can be copied with :

• RDT MULTI 

• MULTI CLONER 3 WHITE

• MULTI CLONER 3 BLACK 

TM4 a 4-channel keyfob that controls all the movements of your gate, rolling shutters, lighting, garage door...etc. according to your specifications. The frequency of this item is 433.92 MHz.  

As for its programming, the Rolling Code device has an auto-programming system with 0 

switch, you have to do the programming in the receiver. 

Aprimatic TM4  remote control with 4 black buttons for garage door operators. This model is powered by a 12V lithium battery type LR23A. A 4-channel Rolling code hand transmitter with a high range up to 100m ! It operates under temperatures from -20°C to +60°C.

The UNICO receiver is ideal for this gate remote control.

The registration of this gate opener only takes few minutes and the programming requires no special equipments. 

If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

Good to know

Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate. 

It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver. 

To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products. 

Ergonomics

Aprimatic TM4 remote control is only 62 mm long, a width of 43 mm and a thickness of 20 mm. If you are looking for a practical remote control with a good design and functionality choose right away TM4. This transmitter is highly aesthetical, its special shape and reduced size makes it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material and its steel keychain, so the device is very tough and strong under all kind of pressure or shocks. Its special shape and 4 black buttons make it very elegant ! 

How to program APRIMATIC TM4 remote control ?

Important steps of the programming

Programming with a programmed remote: 

1. Approach your motor up to 1 meter, press simultaneously on all buttons of the programmed remote until the receiver emits continuous signal.

2. While you hear the audio signal, press simultaneously all buttons on the new remote control, the sound stops and starts again. Release the buttons.

3. Press a button on the new remote, the sound stops and starts again. Release the button. Wait 10 seconds till the sound goes out.

4. Your new remote control is programmed.

Programming with the receiver: 

This method works only with the first remote, once a remote is registered, you must do the remote to remote method. (See programming with a programmed remote above).

1. Turn on the power at the receiver, 10 beeps will follow. Press all buttons of your new remote unti the receiver emits a continuous signal.

2. While you hear the audio signal, press any button on the new remote. The sound stops and starts again. Release the button.

3. Wait 10 seconds till the sound goes out.

4. Your new remote control is programmed.

Can’t seem to program your APRIMATIC TM4 gate remote control ?

 No need to panic, our team is here to assist using our know-how. First of all, consider looking through the information sent with each TM4 remote control. our website also provides instructional videos for most APRIMATIC remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos. 

About the brand APRIMATIC

Aprimatic is a top manufacturer of gate automation systems for Italian and European markets. The experience gained in two decades of presence in the market and the high level of know-how of designers, technicians, testers and consultants guarantees the customer high performance, product reliability and maintenance of value over time.

Today, Aprimatic is the only brand that produces all types of automation, thanks to a comprehensive product range covering all possible areas of application with solutions suitable for residential, commercial, industrial and public areas.

Aprimatic products are designed, developed and manufactured in accordance with UNI EN ISO 9001. This prestigious international recognition involves all activities of Urmet S.p.A. as a leader in communications, security and building automation, offering a total guarantee of the quality of the products and services offered.

Why buy your APRIMATIC TM4 remote control on our website? 

-Advantage 1 : 

Wishing to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere in United Kingdom.

-Advantage 2 : 

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

-Advantage 3 : 

Wanting to save time and be able to use your APRIMATIC TM4 gate remote control immediately? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your APRIMATIC TM4 remote control.
 

Our website will lead you through each stage of the process of buying your APRIMATIC TM4 remote control.